DLC pro is the new benchmark for diode laser controllers. It defines a new level of low noise and convenience. Its low noise and drift levels make our DL pro series lasers even more silent and stable. Its impressive resolution (20 bits and more) enable precise control, and its knob/touch user interface and PC GUI allow for the most comfortable and intuitive operation. Easily change scan parameters with a multi-touch gesture to zoom onto spectral features or use the included FFT to analyze signals.With the intelligent locking option DLC pro Lock installed, you may select a spectral feature by taping it on the screen and lock the laser to that peak with a simple press of a button. The intelligent locking option includes a 2-channel digital PID loop (bandwidth about 30 kHz), modulation and demodulation (11 Hz to 160 kHz) and ReLock. They allow for top-of-fringe as well as side-of-fringe locks with easy optimization of the PID parameter. The features are enabled with a software license.If this license is not purchased along with the DLC pro, the license-protected features may be tested with the 30-day trial license provided with the DLC pro. A license for your device without time limit may then be purchased later. Activating by entering a license-key is an easy procedure that may be done by the customer.For all systems, it is possible to stabilize to power of the laser system by controlling the current of the laser diode (DL pro, CTL) or the tapered amplifier chip (TA pro, TA-SHG pro, TA-FHG pro) using an external photodiode (all systems) or an internal photodiode (CTL, TA pro, TA-SHG pro, TA-FHG pro). Bandwidths in the kilohertz regime are achieved (see CC-500 and CC-5000 sections in the Specifications below).The DLC ext allows extending the DLC pro with TOPTICA’s well-established fast locking modules. These modules provide high performance laser locking if a faster feedback than available with the DLC pro Lock option is needed.TOPTICA provides updates of the software in the download section below and announces new versions by an email newsletter. These updates are not installed automatically. You may subscribe by sending an email to [email protected] with subject "subscribe".

By clicking above, I acknowledge and agree to Endeavor Business Media’s Terms of Service and to Endeavor Business Media's use of my contact information to communicate with me about offerings by Endeavor, its brands, affiliates and/or third-party partners, consistent with Endeavor's Privacy Policy. In addition, I understand that my personal information will be shared with any sponsor(s) of the resource, so they can contact me directly about their products or services. Please refer to the privacy policies of such sponsor(s) for more details on how your information will be used by them. You may unsubscribe at any time.