Shaping light to see deeper inside biological tissue

Integrated wavefront shaping extends the reach of optical imaging to give scientists a deeper and more precise look into biological tissue.

Optical microscopy is an indispensable tool for biomedical research. During the past few decades, it has enabled researchers to visualize biological structures with remarkable precision, down to tens of nanometers, to reveal processes at the level of individual cells and molecules.

But as we descend deeper into biological tissue, the sharp, high-resolution images obtained via optical instruments begin to lose their definition. Today’s microscopes can be used for imaging close to the surface, but struggle to deliver high-resolution images at depth.

The reason is how light interacts with the complex heterogeneous structure of living matter. As photons travel through tissue, they interact with different structures, such as cell membranes, organelle, and other microscopic features, which cause them to scatter. With each scattering event, photons deviate further from their original trajectory, and gradually lose the directional information needed to form a sharp image. The result is that the image loses contrast and resolution.

For optical imaging, it presents a fundamental challenge because it limits how deep scientists can investigate living matter. One promising way to overcome this limitation is wavefront shaping, a technique that compensates for scattering by controlling how light enters and propagates through a medium. But living matter is constantly in motion, so applying wavefront shaping in living tissue is far from straightforward. Researchers at imec and KU Leuven are exploring how integrated photonics can make wavefront shaping faster and more scalable—paving the way for new imaging applications.

Wavefront shaping: Turn fragmentation into focus

At first glance, the scattering of light inside biological tissue may appear hopelessly random. But beneath this apparent randomness lies an underlying logic: Every photon’s path is shaped by the structure of the material it travels through. If this structure can be understood, then, in principle, the distortion it causes can also be reversed.

Wavefront shaping builds on this principle. Instead of sending a beam of light into tissue, the incoming illumination wavefront is carefully tailored before it enters. In practice, it can be achieved using devices such as spatial light modulators (SLMs); for example, via a liquid crystal device similar to displays (LCDs), which adjusts the properties of the incoming light pixel by pixel. This way, the complex scattering behavior of the medium can be identified and compensated. What would normally dissolve into a diffuse glow is effectively pre-corrected and allows the scattered light to refocus into a bright, well-defined spot.

The concept is powerful, but implementing wavefront shaping for real biological environments introduces a crucial challenge: Speed. Living tissue is not static. Cells move, blood flows, and physiological processes continuously reshape the microscopic structure through which light propagates. As a result, the scattering pattern that wavefront shaping seeks to compensate for changes continuously over time. To remain effective, the correction applied to the incoming light must be updated at comparable speeds—often on millisecond timescales or faster. Conventional wavefront shaping approaches, which rely on relatively slow modulation technologies, struggle to keep pace with these dynamics. This makes it difficult to maintain a stable focus deep inside living tissue.

Bring wavefront shaping onto a chip

To address this speed limitation, researchers at imec and KU Leuven turned to integrated photonics to bring wavefront control onto a photonic chip. At the core of this concept are arrays of microscopic waveguides etched onto the chip, known as optical phased arrays (OPAs). These structures consist of many individually controlled light-emitting channels, whose phases can be tuned with high precision. By adjusting these phases in a coordinated way, the chip can shape the incoming illumination wavefront, effectively applying the corrections needed to compensate for scattering inside the tissue.

In a series of studies,1-3 researchers demonstrated these integrated photonic chips can successfully perform wavefront shaping within strongly scattering media. The experiments showed the chips can refocus scattered light into a well-defined spot with focus contrasts reaching about 90% of the theoretical maximum. Even after light has been strongly scrambled, the chip can effectively compensate for scattering and bring light back into focus with almost maximum efficiency.

Beyond effective light control, the team also showed the chip technology can operate at update rates of around 5,000 wavefront corrections per second, which makes it significantly faster than conventional liquid crystal-based modulators.

Together, these results demonstrate how integrated photonics can combine effective light control with the speed required for dynamic scattering environments. But its potential extends beyond performance alone. By integrating multiple optical functions on a single chip, wavefront shaping systems can become significantly more compact than conventional approaches based on liquid crystal modulators. At the same time, the chip-based platform makes it easier to combine wavefront shaping with additional functionalities, which creates a flexible foundation for future optical imaging systems.

Towards practical imaging applications

These results highlight the potential of integrated photonics as a scalable platform for wavefront shaping. The next question is where its combination of speed, precision, and compactness can have the greatest impact.

By actively controlling how light propagates through scattering media, wavefront shaping can restore focus in situations where image quality would otherwise rapidly deteriorate. It opens the door to applications that are difficult or impossible to achieve via conventional optical approaches.

This is particularly relevant for fields such as neuroscience, where researchers rely on optical methods to study brain activity but are constrained by limited imaging depth. Extending this range, while preserving resolution, would allow them to observe biological processes that can’t currently be measured directly.

The same principle applies to biomedical diagnostics. Improving how light is guided through tissue could enhance the contrast and sensitivity of optical imaging techniques to support more accurate detection of diseases.

Another promising, and perhaps less intuitive, application area lies in multimode optical fibers. While optical fibers are best known for transmitting large amounts of data in telecommunications networks, their small diameter also makes them attractive as ultrathin imaging probes to reach locations deep inside the body that are impossible to access with conventional instruments.

But this advantage comes with a challenge: As light travels through the fiber along many different paths, the optical signal becomes distorted and prevents the formation of a sharp image. By shaping the incoming light with an optical phased array, researchers can compensate for this distortion and reconstruct a sharp focus at the fiber’s output. This could enable high-resolution imaging through a hair-thin fiber, which would significantly reduce the invasiveness of endoscopic procedures.

Next steps: From proof of concept to broader application

Building on these emerging application opportunities, the development of integrated wavefront shaping continues to move forward. Further developments are underway to improve the underlying photonic platform, with a particular focus on increasing speed, scalability, and robustness. At the same time, ongoing efforts are aimed at integrating more functionality onto a single chip to reduce system complexity and make wavefront shaping easier to deploy for practical settings.

Wavefront shaping already offers a way to recover information that scattering appears to erase. Integrated photonics now provides a route to doing it with greater speed, precision, and compactness. For optical imaging, this shift is significant. As one of the main barriers to deep tissue imaging, scattering has long constrained what can be observed with light. Integrated wavefront shaping can help overcome that limitation and help scientists see deeper and with greater precision into biological systems than ever before.

REFERENCES

1. F. Milojković et al., ACS Photonics, 11, 10, 4288–4296 (2024); https://doi.org/10.1021/acsphotonics.4c01228. 

2. F. Milojković et al., ACS Photonics, 12, 11, 6335–6342 (2025); https://doi.org/10.1021/acsphotonics.5c01814. 

3. F. Milojković et al., Nanophotonics, 14, 3255–3264 (2025); https://doi.org/10.1515/nanoph-2025-0273.

About the Author

Pol Van Dorpe

Pol Van Dorpe

Pol Van Dorpe is an imec fellow in the health sector. He obtained his Ph.D. in 2006 at KU Leuven for research on spintronics at imec. He has worked on several topics during his time at imec: spintronics, plasmonics, biophotonics, and single-molecule sensing. Van Dorpe holds a position as a part-time associate professor at the physics department of KU Leuven. His main research focus is enabling novel applications in the life sciences field using integrated photonic concepts and single-molecule electronic and ionic devices. His efforts were recognized as he earned the title of imec fellow in 2020.

Filip Milojković

Filip Milojković

Filip Milojković is a researcher at imec focusing on development of integrated photonics for novel biomedical applications, including wavefront shaping in microscopy. He earned his BSc at the University of Belgrade (2019) and MSc in Photonics from Ghent University and VUB (2021). In 2021, Filip started as a doctoral researcher at imec and KU Leuven, working on photonic integrated circuits for wavefront shaping in biomedical imaging. In 2026, he earned a Ph.D. in Physics from KU Leuven.

Niels Verellen

Niels Verellen

Niels Verellen is a scientific director at imec focusing on exploratory photonics. His main research activities are geared towards novel application enablers in the life sciences and quantum sensing domains, based on integrated photonics. He is also a research fellow at the KU Leuven Quantum solid-state physics group where he received his MSc (2007) and Ph.D. (2011) degrees in physics. He was awarded the Umicore Scientific Award in 2012 and received an ERC Starting Grant and ERC Proof of Concept Grant to develop an integrated photonics-based high-throughput microscopy platform.

Sign up for our eNewsletters
Get the latest news and updates

Voice Your Opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!