Whispering gallery mode laser uses light to also generate sound

July 23, 2018
You can use a light field to trigger the mechanical movement that will generate an acoustic (sound) wave.

A team of international researchers led by engineers at Washington University in St. Louis has developed a lasing system already adept at producing tiny light packets called photons into a tunable system that also makes little bits of mechanical energy called phonons--the energy products of oscillation, or vibration. In doing so, they are the first research group to broaden what is called a laser linewidth in the phonon laser and steer it through a physical system known as the "exceptional point." The study, which involved collaborators from China, Austria, Japan and Michigan, was published in the July 9, 2018, issue of Nature Photonics.

RELATED ARTICLE: Brillouin laser in silicon emits light and sound

"We've shown that you can use a light field to trigger the mechanical movement that will generate an acoustic (sound) wave," said Lan Yang, the Edwin H. & Florence G. Skinner Professor of Electrical & Systems Engineering. "Think of phonon lasing as a counterpart to traditional optic, or photon lasing, with exciting applications in medical surgery, materials science and communications. We have demonstrated a controllable phonon laser that can be tuned for threshold and linewidth, among other potential parameters.

"Our study for the first time provides direct evidence that exceptional point-enhanced optical noises can be transferred directly to mechanical noises," Yang said.

Yang's laser, an acronym for light amplification by stimulated emission of radiation, belongs to a category called whispering gallery mode (WGM) resonators, which work like the famous whispering gallery in St. Paul's Cathedral in London, where someone on the one side of the dome can hear a message spoken to the wall by someone on the other side. Unlike the dome, which has resonances or sweet spots in the audible range, the sensor resonates at light frequencies and now at vibrational or mechanical frequencies.

Think of the exceptional point as a complex, super-energy mode where often unpredictable and counterintuitive phenomena occur. Already, the exceptional point has contributed to a number of counterintuitive activities and results in recent physics studies--with more expected to be discovered. In this international research project, mathematical tools were used to describe the physical system: An exceptional point arose in a physical field when two complex eigenvalues and their eigenvectors coalesced, or became one and the same.

Picture the two WGM microresonators set closely to each other in a field with two photon detectors connected by a wave guide which brings light in and out of the system. Call these two "super modes" Resonator 1 and Resonator 2. "In the first resonator, which supports photons and produces phonons, we know when the light field is strong enough the radiation will trigger the mechanical oscillation related to the acoustic wave vibration," Yang said. "We calibrated the acoustic wave frequency at 10 megahertz. Then we adjusted the gap between the two resonators to look at the transmission spectrum of the coupled resonators. When we changed the gap, we found that we could tune the spectral distance. We tuned it from 100 megahertz, to 80 to 50 depending on the physical gap between the resonators. If you tune the gap nicely to match the spectral distance between the two to the frequency of the mechanical vibration, then you have resonance."

The two light fields have two different frequencies and energy levels. The mechanical frequency of 10 megahertz matches the energy difference between the two super modes. Both resonators support photons, but only one produces phonons.

In future work, Yang intends to study more deeply the energy exchange between the two super modes in phonon lasing and continue to seek surprises at the exceptional point.

SOURCE: Washington University in St. Louis; https://engineering.wustl.edu/news/Pages/Vibrations-at-an-exceptional-point.aspx

About the Author

Gail Overton | Senior Editor (2004-2020)

Gail has more than 30 years of engineering, marketing, product management, and editorial experience in the photonics and optical communications industry. Before joining the staff at Laser Focus World in 2004, she held many product management and product marketing roles in the fiber-optics industry, most notably at Hughes (El Segundo, CA), GTE Labs (Waltham, MA), Corning (Corning, NY), Photon Kinetics (Beaverton, OR), and Newport Corporation (Irvine, CA). During her marketing career, Gail published articles in WDM Solutions and Sensors magazine and traveled internationally to conduct product and sales training. Gail received her BS degree in physics, with an emphasis in optics, from San Diego State University in San Diego, CA in May 1986.

Sponsored Recommendations

Request a quote: Micro 3D Printed Part or microArch micro-precision 3D printers

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a Micro 3D Printed Benchmark Part: Send us your file.

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

How to Tune Servo Systems: The Basics

April 10, 2024
Learn how to tune a servo system using frequency-based tools to meet system specifications by watching our webinar!

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!