JENOPTIK Optical Systems LLC

16490 Innovation Dr
Jupiter, FL 33458
United States
561-881-7400
Visit Company Website
[email protected]

More Info on JENOPTIK Optical Systems LLC

Jenoptik Optical Systems is a global OEM supplier of solutions and products in the fields of optics, laser technology, digital imaging, opto-electronics, sensors and software.

Articles

(Photo credit: Jenoptik Optical Systems LLC)
Jay Kumler (February 1, 1964 - February 10, 2025).
Kumler, who served as president of Jenoptik North America and Jenoptik Optical Systems, passed away on February 10, 2025.
(Image credit: Leonardo DRS)
FIGURE 1. DRS’s Image Contrast Enhancement (ICE) algorithm, available on the company’s Tenum 640 (top) and other of its cameras, is based upon the company’s patented Enhanced Multiresolution Local Area Processing (emLAP); DRS says that emLAP stably preserves the maximum visual content throughout the spectrum of the original sensor output with a user-definable degree of detail enhancement (lower images). EmLAP maps wide-dynamic-range sensor data into a clear lower-dynamic-range image sequence with smooth and stable transitions, including between dramatically different scene dynamics and temperature extremes. Notice that in the typical image at left, the firefighter is almost invisible. More details are visible in the low mode at center. In the highly enhanced image at right, many more details are visible, including a building that can be seen through the open window.
Longwave-infrared focal-plane arrays enable a vast number of near-room-temperature thermal-imaging applications.
(Courtesy of Sill Optics)
FIGURE 1. An adaptive laser micromachining process operates in a way similar to an optical coherence tomography (OCT) measurement (a). The f-theta lens is seen inside the micromachining setup (b). A carbide drill with an undercut fabricated using adaptive microdrilling has a depth accuracy more accurate by a factor of about five in comparison to if it were made via a nonadaptive laser process (c).
F-theta lenses have a laser spot position linearly proportional to the scan angle and are thus useful in many laser-scanning applications.
NASA
An artist's concept shows a rover on Mars
The Jenoptik Light & Optics team has been developing three types of mission critical lenses for the Mars Rover’s engineering cameras.
1712 Lfw Pro 3
Standard quick-turn silicon optics will enable testing development systems quickly to get them to market.
(Image: Jenoptik)
Jay Kumler, president of Jenoptik, appointed to Luminate national advisory board
Industry expert Jay Kumler joins 11 other optics, photonics, and imaging innovators on the Luminate advisory board.
(Image credit: Jenoptik)
The new Jenoptik Dome Theater in Jupiter, FL showcases laser cinema projection lenses.
The new Jenoptik Dome Theater was designed for testing and demonstrating laser projection lenses for digital cinema.
FIGURE 1. A new wafer-scale etching technique can create refractive micro-optic elements in calcium fluoride.
Using non-traditional etching techniques, it is possible to fabricate diffractive/refractive calcium-fluoride (CaF2) micro-optics for deep-UV excimer laser systems that can increase...

Contacts

Song Chung

VP Sls

JENOPTIK Optical Systems LLC's Categories

Buyer’s Guide Listing Information

Click here for listing information and directions on how to add or update your company.

Request More Information From JENOPTIK Optical Systems LLC

By clicking above, I agree to Endeavor Business Media's Terms of Service and consent to receive promotional communications from Endeavor, its affiliates, and partners per its Privacy Notice. I also understand my personal information will be shared with the sponsor of this content, who may contact me about their offerings per their privacy policy. I can unsubscribe anytime.