Jenoptik lenses will reveal the first images from NASA’s Mars 2020 mission

July 26, 2019
The Jenoptik Light & Optics team has been developing three types of mission critical lenses for the Mars Rover’s engineering cameras.
NASA
An artist's concept shows a rover on Mars
An artist's concept shows a rover on Mars
An artist's concept shows a rover on Mars
An artist's concept shows a rover on Mars
An artist's concept shows a rover on Mars
An artist's concept shows a rover on Mars

For NASA’s Mars 2020 mission, the first images sent back to Earth in February of 2021 will be seen through lenses designed and engineered by Jenoptik.

The Jenoptik Light & Optics (Jupiter, FL) team has been developing three types of mission critical lenses for use with the Mars Rover’s engineering cameras. Navigation lenses will capture the first live video footage from the mission as the rover explores the surface of Mars, crucially important when the rover drives autonomously. Hazard avoidance lenses will provide images that will help the rover identify obstacles and allow NASA engineers to see the movement of the robotic arm during sample collection. Finally, a cache lens will verify that a complete collection of the rock and soil samples have been achieved. Due to the cache lens’ proximity to the samples collected, to avoid contamination, the cleanliness requirements are extremely challenging.

All three lens types were built in a Jenoptik class 5 clean room with state-of-the-art filtration technology for high-precision optical assemblies. Custom test equipment was developed at Jenoptik to measure the optical performance during the demanding temperature extremes to withstand the conditions on Mars. Jenoptik performed several environmental tests in vacuum and over a wide temperature range with the lowest temperature being -135 degrees C.

“Jenoptik is accustomed to demanding applications requiring expertise in the design, manufacture, and testing of complex optical assemblies in the fields of semiconductor, medical devices and defense industries”, said Jay Kumler, President of Jenoptik Optical Systems in North America. “We are very proud of the technical challenges and rigorous testing we have overcome which has really benefited the entire company, and we are honored to be a part of the monumental mission to Mars.”

SOURCE: Jenoptik; https://www.jenoptik.com/press/pressreleases/2019/07/22/lenses-for-mars-2020-mission

About the Author

Gail Overton | Senior Editor (2004-2020)

Gail has more than 30 years of engineering, marketing, product management, and editorial experience in the photonics and optical communications industry. Before joining the staff at Laser Focus World in 2004, she held many product management and product marketing roles in the fiber-optics industry, most notably at Hughes (El Segundo, CA), GTE Labs (Waltham, MA), Corning (Corning, NY), Photon Kinetics (Beaverton, OR), and Newport Corporation (Irvine, CA). During her marketing career, Gail published articles in WDM Solutions and Sensors magazine and traveled internationally to conduct product and sales training. Gail received her BS degree in physics, with an emphasis in optics, from San Diego State University in San Diego, CA in May 1986.

Sponsored Recommendations

Achieving Ultralow-Loss Photonics Array Alignment

Feb. 23, 2024
Two- and three-dimensional photonics arrays are commonly used for coupling light in photonic integrated circuits. With the increasing demand for ultralow-loss transmission in ...

Control Techniques in Laser Processing

Feb. 23, 2024
A laser processing tool is only as good as the motion equipment underneath it. One must first consider design characteristics of a motion platform, and second, advanced control...

High-Precision Laser Processing for Medical Device Manufacturing

Feb. 23, 2024
Laser processing has been used for decades to manufacture tubular medical devices, such as stents, valves, and vascular grafts. However, achieving the precision that is necessary...

Selecting Optimal Positioning Equipment for Laser Direct-Write Processes

Feb. 23, 2024
Choosing the optimal automation equipment for a given process requires a thorough understanding of the process parameters and the effects of positioning errors on the results....

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!