The CUV-DHC-XE-LED-DA direct-attach cuvette holder with attenuator for Avantes' Xenon and LED light sources eliminates the need for an extra fiber. The cuvette holder is designed for 10 x 10 mm cuvettes, and the incorporated attenuator provides intensity control of the light beam with an incorporated iris. The cuvette holder also includes a 5 mm slot for filters.
Avantes BV
Eerbeek, the Netherlands
[email protected]
-----
PRESS RELEASE
Eerbeek, April, 2010
Re.: Press Release by AVANTES Eerbeek, The Netherlands
Avantes introduces Direct Attached Cuvette Holder with Attenuator
CUV-DHC-XE-LED-DA improving light throughput significantly
Avantes introduces a completely new designed cuvette holder with attenuator for Avantes Xenon and LED light sources, with substantial benefits for the user. Attaching the CUV-DHC-XE-LED-DA directly to the light source removes the need for an extra fiber with its subsequent surface transfers and attenuation in the optical path.
Compared to a normal Cuvette holder improves the new CUV-DHC-XE-LED-DA design the light throughput by a factor of 200 in the UV range and 60 in the VIS/ NIR range.
The new cuvette holder is designed for 10x10 mm cuvettes and is directly attachable to all Avantes Xenon and LED light sources. The new attenuator, incorporated in the design of the cuvette holder, provides the ability to control the intensity of the light beam with an incorporated iris. The cuvetteholder is equipped with a 5 mm slot for filters.
For additional information about Avantes’ products and services or to request Avantes’ new Solutions in Spectroscopy catalogue VII, please visit the Avantes site at www.avantes.com or email to [email protected] or in North America [email protected].
