Cesium atomic optical wristwatch is entirely self-contained

Oct. 2, 2013
Kapaa, HI--The wristwatch enthusiast's website watchuseek is reporting that Bathys Hawaii, which produces specialist watches for use in extreme environments, has created a wristwatch based on an entirely self-contained cesium atomic optical clock.

Kapaa, HI--The wristwatch enthusiast's website watchuseek is reporting that Bathys Hawaii, which produces specialist watches for use in extreme environments, has created a wristwatch based on an entirely self-contained cesium atomic optical clock. Such clocks use a laser to stimulate a hyperfine transition of ground-state cesium-133.

The watch was created by watchmaker John Patterson and engineer George Talbot, according to watchuseek.

Accurate to 1 s per 1000 years

“The technology found in this watch is something even a decade ago no one could imagine existing in such a small package,” says Patterson. “Within a single chip there is a laser, a heater, a sealed cavity of cesium gas, a microwave filter, and a photodiode detector. Using the exact same principle of counting hyperfine lines of excited cesium-133 atoms used by the National Institute of Standards and Technology (NIST), our watch is able to achieve unprecedented levels of accuracy: on the order of one second per thousand years.”

The new watch is called the “Cesium 133.” As explained on watchuseek, "Unlike so-called 'atomic wrist watches' that use a radio signal generated by the U.S. government to keep accurate time, this new watch has its own self-contained cesium source that generates the time signal independently."

The watch is only a prototype, as is made obvious by its large size of 60 x 50 x 23 mm; Patterson will be working to reduce its size, as well as extend its battery life. The aim is to produce a limited edition of 20 watches in 2014, selling at $12,000 each.

There are other types of atomic optical clocks that beat cesium clocks in accuracy, such as strontium clocks; however, they don't yet fit on the wrist.

Source: http://www.watchuseek.com/news/bam-bathys-hawaii-creates-world-s-most-accurate-wristwatch-the-cesium-133

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

Flexible, Thixotropic, One Component Dual Cure Epoxy

Dec. 1, 2023
Master Bond UV23FLDC-80TK is a moderate viscosity, cationic type system that offers both UV light and heat curing mechanisms. It cures readily within 20-30 seconds when exposed...

MRF Polishing

Dec. 1, 2023
Welcome to Avantier, your esteemed partner in optical solutions for over five decades. With a legacy of expert knowledge, we invite you to delve into the realm of precision optics...

Fluorescence Microscopy Part 1: Illuminating Samples for High-Resolution Imaging

Dec. 1, 2023
Illuminating Samples Fluorescence microscopy is a powerful imaging technique widely used in various fields, especially in biomedical research, to visualize and study fluorescently...

Photonics Business Moves: December 1, 2023

Dec. 1, 2023
Here are the top four photonics business moves that made headlines during the week ending December 1, 2023.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!