Ultracold strontium atoms enable super-accurate optical lattice clock

March 1, 2008
The trapping of laser-cooled strontium (Sr) atoms may enable optical clocks that are more accurate and stable than the current cesium atomic clock, say physicists at Physikalisch-Technishe Bundesanstalt (PTB; Braunschweig, Germany).

The trapping of laser-cooled strontium (Sr) atoms may enable optical clocks that are more accurate and stable than the current cesium atomic clock, say physicists at Physikalisch-Technishe Bundesanstalt (PTB; Braunschweig, Germany). Such optical clocks use the oscillation of light waves as their “pendulum,” rather than the microwave oscillations of cesium devices. The 88Sr atoms are first Doppler cooled to 2 mK via the broad 1S0–1P1 transition at 461 nm. The second cooling step involves the spin-forbidden 1S0–3P1 transition at 689 nm, which minimizes reabsorption of spontaneous emission. To reach temperatures around 1 µK, 28 ms of single-frequency cooling follows 50 ms of broadband cooling, with a transfer efficiency of 23%, leaving a cloud of atoms in a far-off resonance optical lattice trap formed by the interference pattern of two 813 nm laser beams. Simultaneous operation of a magneto-optical trap and lattice trap enable a transfer efficiency of atoms into the dipole trap of approximately 60%. The high atomic density will enable the precise evaluation of frequency shifts that might eventually lead to an improved definition of the second. Contact Uwe Sterr at [email protected].

Sponsored Recommendations

Request a quote: Micro 3D Printed Part or microArch micro-precision 3D printers

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a Micro 3D Printed Benchmark Part: Send us your file.

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

How to Tune Servo Systems: The Basics

April 10, 2024
Learn how to tune a servo system using frequency-based tools to meet system specifications by watching our webinar!

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!