Quantum-dot mode-locked laser on silicon transmits data at 4.1 Tbit/s

March 1, 2019
The gallium arsenide (GaAs)-based quantum-dot laser’s frequency comb contains 64 channels with linewidths of 1.8 kHz.

A group at the University of California (UCSB) has created a high-channel-count 20 GHz passively mode-locked quantum-dot laser directly grown—for the first time, to the group’s knowledge—on a silicon substrate. With a proven 4.1 Tbit/s transmission capacity, the micron-sized laser leaps an estimated full decade ahead from today’s best commercial standard for data transmission, say the researchers, which is currently reaching for 400 Gbit/s on Ethernet. The technology is the latest high-performance candidate using the tried-and-true wavelength-division-multiplexing (WDM) technique. “We want more coherent wavelengths generated in one cheap light source,” says Songtao Liu, one of the researchers. “Quantum dots can offer you wide gain spectrum, and that’s why we can achieve a lot of channels.”

The laser, which is grown on a CMOS-compatible silicon substrate, is passively mode-locked to prevent noise from wavelength competition in the laser cavity and stabilize data transmission. Mode-locking produces a frequency comb with a 3 dB optical bandwidth of 6.1 nm. An external semiconductor optical amplifier (SOA) boosted the signal and suppressed low-frequency mode partition noise. The high transmission rate is achieved by using 64 channels (comb teeth) and a 32 Gbaud Nyquist four-level pulse amplitude modulation format.

The device is intended to become part of silicon electronic and photonic integrated circuits (EPICs). While silicon is a good material for the quality of light it can guide and preserve, and for the ease and low cost of its large-scale manufacture, it’s not so good for generating light. “If you want to generate light efficiently, you want a direct-bandgap semiconductor,” Liu says. “Silicon is an indirect band-gap semiconductor.” The quantum dot laser, grown on silicon molecule-by-molecule at UCSB’s nanofabrication facilities, is a structure that takes advantage of the electronic properties of several semiconductor materials for performance and function (including their direct bandgaps), in addition to silicon’s own well-known optical and manufacturing benefits. Since John Bowers and his UCSB group a decade ago demonstrated the world’s first hybrid silicon laser (an effort in conjunction with Intel), the silicon photonics world has continued to create higher-efficiency, higher-performance technology while maintaining as small a footprint as possible, with an eye on mass production. The quantum dot laser on silicon, Bowers and Liu say, is state-of-the-art technology that delivers the superior performance that will be sought for future devices. Reference: S. Liu et al., Optica (2019); https://doi.org/10.1364/optica.6.000128.

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

Demonstrating Flexible, Powerful 5-axis Laser Micromachining

Sept. 18, 2024
Five-axis scan heads offer fast and flexible solutions for generating precise holes, contoured slots and other geometries with fully defined cross sections. With a suitable system...

Enhance Your Experiments with Chroma's Spectra Viewer

Sept. 5, 2024
Visualize and compare fluorescence spectra with our interactive Spectra Viewer tool. Easily compare and optimize filters and fluorochromes for your experiments with this intuitive...

Optical Filter Orientation Guide

Sept. 5, 2024
Ensure optimal performance of your optical filters with our Orientation Guide. Learn the correct placement and handling techniques to maximize light transmission and filter efficiency...

Ensure Optimal Performance with Shortpass Filters

Sept. 5, 2024
Achieve precise wavelength blocking with our Shortpass Filters. Ideal for applications requiring effective light transmission and cutoff, these filters ensure optimal performance...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!