TMOS display aims to outperform OLED, plasma, and LCD

Dec. 1, 2007
UniPixel Displays (The Woodlands, TX) has developed a time-multiplexed optical-shutter (TMOS) display technology that the company says can surpass organic-light-emitting-diode (OLED), plasma, and liquid-crystal (LCD) display technologies with its brighter, higher-contrast, better-color, more-energy-efficient, physically flexible, and less-expensive display capabilities.

UniPixel Displays (The Woodlands, TX) has developed a time-multiplexed optical-shutter (TMOS) display technology that the company says can surpass organic-light-emitting-diode (OLED), plasma, and liquid-crystal (LCD) display technologies with its brighter, higher-contrast, better-color, more-energy-efficient, physically flexible, and less-expensive display capabilities.

Low cost is realized by the roll-to-roll manufactured Opcuity active-layer thin film that replaces an LCD panel’s liquid crystals, color filters, polarizers, cell structures, and brightness-enhancement films, and by an edge-light module that replaces the large LCD backlight. Opcuity is a thin film with micro-optic structures on one surface that are surrounded by a conductive material deposited in the valleys between the structures. Thin-film transistors control the display-surface shutters allowing red, green, and blue light injected from the edge-mounted light-emitting diodes to escape through frustrated total internal reflection. Rather than blending the light output from three adjacent color filters, TMOS uses short bursts of color in different durations through a single pixel to create different daylight-readable colors and hues across the display. UniPixel is currently producing prototype units and partnering with end-user and supply-chain companies to integrate TMOS in mobile displays. Contact Jim Tassone at [email protected].

Sponsored Recommendations

Request a quote: Micro 3D Printed Part or microArch micro-precision 3D printers

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a Micro 3D Printed Benchmark Part: Send us your file.

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

How to Tune Servo Systems: The Basics

April 10, 2024
Learn how to tune a servo system using frequency-based tools to meet system specifications by watching our webinar!

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!