Octave-spanning CW supercontinuum laser has a 72 W optical output

March 24, 2020
Two spectrally combined fiber laser pumps are combined with standard single-mode fiber to produce a high-power supercontinuum laser with a 44% conversion efficiency.
2003 Lf Wnb Z03
2003 Lf Wnb Z03
2003 Lf Wnb Z03
2003 Lf Wnb Z03
2003 Lf Wnb Z03

Supercontinuum lasers rely on nonlinear optical interactions within optical fibers driven by lasers to produce broadband light, usually with near single-transverse-mode quality. Many, although not all, supercontinuum lasers rely on specially engineered fibers to produce nonlinear effects. Also, many but not all supercontinuum lasers are driven by pulsed lasers due to the greater light/matter interaction resulting from the high peak powers of the pulses. Continuous-wave (CW) supercontinuum lasers do exist, most of which rely on engineered fibers for enhanced nonlinear effects. Now, a group at the Centre for Nano Science and Engineering, Indian Institute of Science (Bangalore, India) has created a CW supercontinuum laser that is based on standard telecom optical fiberand the device shows a record output power of about 72 W.

Standard single-mode fiber (SMF 28e) has a zero-dispersion wavelength (ZDW) at around 1.3 μm, offering a simple and cost-effective way to produce a high-power supercontinuum. The Bangalore group had previously demonstrated a CW supercontinuum laser with an all-fiber architecture and 34 W output, with the device power limited by the driving laser, which was a single source. In the new 72 W device, dual ytterbium (Yb)-doped fiber-laser modules operating at different wavelengths and spectrally combined are used to scale up the pump power. The result is a conversion efficiency of 44%, a spectrum ranging from 850 to beyond 1900 nm (greater than an octave), and nearly single-mode beam quality. Power spectral densities of >3 mW/nm from 850 to 1350 nm and >100 mW/nm from 1350 to 1900 nm have been obtained. Reference: S. Arun et al., Opt. Lett. (2020); https://doi.org/10.1364/OL.384690.

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

Melles Griot® XPLAN™ CCG Lens Series

March 19, 2024
IDEX Health & Science sets a new standard with our Melles Griot® XPLAN™ CCG Lens Series fluorescence microscope imaging systems. Access superior-quality optics with off-the-shelf...

Spatial Biology

March 19, 2024
Spatial Biology refers to the field that integrates spatial information into biological research, allowing for the study of biological systems in their native spatial context....

Custom-Engineered Optical Solutions for Your Application

March 19, 2024
We combine advanced optical design and manufacturing technology, with decades of experience in critical applications, to take you from first designs to ongoing marketplace success...

Semrock Optical Filters Resources

March 19, 2024
Looking for more information about Semrock optical filters? Explore sets by fluorophore, download the 2023 Semrock catalog and more.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!