Researchers at Brown University (Providence, RI) have developed a new biosensor that, combining dye chemistry with plasmonic interferometry, can selectively measure glucose concentrations in a complex fluid like saliva. A dependable glucose monitoring system that uses saliva rather than blood would be a significant improvement in managing diabetes.
Related: The many approaches and applications of biosensing
The new chip makes use of a series of specific chemical reactions combined with plasmonic interferometry, a means of detecting chemical signature of compounds using light. The device is sensitive enough to detect differences in glucose concentrations that amount to just a few thousand molecules in the sampled volume.
“We have demonstrated the sensitivity needed to measure glucose concentrations typical in saliva, which are typically 100 times lower than in blood,” says Domenico Pacifici, an assistant professor of engineering at Brown University, who led the research. “Now we are able to do this with extremely high specificity, which means that we can differentiate glucose from the background components of saliva.”
The biochip is made from a 1 in.2 piece of quartz coated with a thin layer of silver. Etched in the silver are thousands of nanoscale interferometers (tiny slits with a groove on each side)—the grooves measure 200 nm wide, and the slit is 100 nm wide. When light is shined on the chip, the grooves cause a wave of free electrons in the silver—a surface plasmon polariton—to propagate toward the slit. Those waves interfere with light that passes through the slit. Sensitive detectors then measure the patterns of interference generated by the grooves and slits.
When a liquid is deposited on the chip, the light and the surface plasmon waves propagate through that liquid before they interfere with each other. That alters the interference patterns picked up by the detectors, depending on the chemical makeup of the liquid. By adjusting the distance between the grooves and the center slit, the interferometers can be calibrated to detect the signature of specific compounds or molecules, with high sensitivity in extremely small sample volumes.
In a paper published in 2012, the Brown team showed that interferometers on a biochip could be used to detect glucose in water. However, selectively detecting glucose in a complex solution like human saliva was another matter.
“Saliva is about 99 percent water, but it’s the 1 percent that’s not water that presents problems,” Pacifici says. “There are enzymes, salts, and other components that may affect the response of the sensor. With this paper, we solved the problem of specificity of our sensing scheme.”
They did that by using dye chemistry to create a trackable marker for glucose. The researchers added microfluidic channels to the chip to introduce two enzymes that react with glucose in a very specific way. The first enzyme, glucose oxidase, reacts with glucose to form a molecule of hydrogen peroxide. This molecule then reacts with the second enzyme, horseradish peroxidase, to generate a molecule called resorufin, which can absorb and emit red light, thus coloring the solution. The researchers could then tune the interferometers to look for the red resorufin molecules.
“The reaction happens in a one-to-one fashion: A molecule of glucose generates one molecule of resorufin,” Pacifici says. “So we can count the number of resorufin molecules in the solution, and infer the number of glucose molecules that were originally present in solution.”
The team tested its combination of dye chemistry and plasmonic interferometry by looking for glucose in artificial saliva, a mixture of water, salts, and enzymes that resembles the real human saliva. They found that they could detect resorufin in real time with great accuracy and specificity. They were able to detect changes in glucose concentration of 0.1 µmol/L—10 times the sensitivity that can be achieved by interferometers alone.
The next step in the work, Pacifici says, is to start testing the method in real human saliva. Ultimately, the researchers hope they can develop a small, self-contained device that could give diabetics a noninvasive way to monitor their glucose levels.
“We are now calibrating this device for insulin,” Pacifici says, “but in principle we could properly modify this ‘plasmonic cuvette’ sensor for detection of any molecule of interest.” To that end, it could be used to detect toxins in air or water or used in the lab to monitor chemical reactions as they occur at the sensor surface in real time, he says.
Full details of the work appear in the journal Nanophotonics; for more information, please visit http://dx.doi.org/10.1515/nanoph-2013-0057.
-----
Don't miss Strategies in Biophotonics, a conference and exhibition dedicated to development and commercialization of bio-optics and biophotonics technologies!
Follow us on Twitter, 'like' us on Facebook, and join our group on LinkedIn
Subscribe now to BioOptics World magazine; it's free!