Components & Systems Products

Jan. 1, 2010
The LSM 780 laser scanning microscope uses new GaAsP detector technology to nearly double imaging sensitivity, compared with previously state-of-the-art systems.

Compiled By barbara goode

High-sensitivity laser scanning microscope

The LSM 780 laser scanning microscope uses new GaAsP detector technology to nearly double imaging sensitivity, compared with previously state-of-the-art systems. It aims to facilitate quick visualization of weakly fluorescent and bleach-sensitive specimens, and perform high-quality imaging of tissues with fine structures. It enables high-speed scanning and provides intelligent enhancement of image dynamics.
Carl Zeiss MicroImaging GmbH, Jena, Germany, bioopticsworld.com/articles/370372</p>

Monolithic laser combiner

The MLC400 monolithic laser combiner system for confocal and fluorescence microscopy includes patented complex monolithic optic (CMO) technology and proprietary fiber coupling capability. The integrated lasers and optics are permanently aligned, offering system stability and ease-of-use. It is compatible with all major microscope systems.
Agilent Technologies, Santa Clara, CA, bioopticsworld.com/articles/371757

Multi-axis stages for super-resolution microscopy

The PI nano1x3 series XY and XYZ nanopositioning stages, designed for inverted microscopes from Leica, Nikon, Olympus, and Zeiss, promise highly accurate motion with sub-nanometer resolution over travel ranges of 200 µm. The low profile (20 mm) design facilitates integration, and a large aperture accommodates such accessories as slide and Petri dish holders.
PI (Physik Instrumente), Auburn, MA, USA, bioopticsworld.com/articles/371425/

Comprehensive gene analysis sets

Solaris qPCR Gene Expression Assays are gene specific pre-designed probe and primer sets for real-time polymerase chain reaction (RT-PCR). The assays are pre-designed using an advanced algorithm and incorporate Minor Groove Binder (MGB) and Superbase technologies for performance and universal cycling. And, they are optimized to assure coverage of all known splice variants of the target gene.
Thermo Scientific, Waltham, MA, USA, bioopticsworld.com/articles/371009

Low-noise green lasers

The Genesis CW green (532 nm) lasers promise low-noise (< 0.1% rms) and excellent mode quality (M2 <1.1). The 1000 S model produces more than 1 watt of output power, while the 500 S delivers more than 0.5 watts. Both are air-cooled, can be directly modulated, and are available in OEM packaging.
Coherent Inc., Santa Clara, CA, bioopticsworld.com/articles/370454

Single-molecule force spectroscopy system

Real-time single-molecule force spectroscopy used to be complicated. But ForceRobot 300's intelligent software automates setup and provides continuous adjustment for efficiency. Integrated optical techniques enable targeted, direct measurement of forces between and within molecules, providing sensitivity sufficient to characterize molecular interactions such as the unfolding of single proteins. It works in stand-alone mode or can be mounted on an inverted optical microscope to enable simultaneous fluorescence microscopy.
JPK Instruments, Berlin, Germany, bioopticsworld.com/articles/370982

Affordable DPSS alternative

Designed for flow cytometry and microscopy applications, the Stradus 488 nm diode laser module provides 50mW output–and thus is an affordable alternative to standard, high-power-output diode-pumped, solid-state (DPSS) lasers.
Vortran Laser Technology Inc., Sacramento, CA, bioopticsworld.com/articles/371443

Multi-user spectrophotometer

The Epoch multi-volume spectrophotometer system is designed for monochromator-based absorbance measurements in volumes as low as 2 µL. Together, the microplate spectrophotometer and the software-controlled multi-volume plate target labs with multiple users and multiple assays. With its wavelength range of 200 nm to 999 nm, it provides optimal performance for applications such as nucleic acid and protein quantification.
BioTek, Winooski, VT, bioopticsworld.com/articles/369007

More Brand Name Current Issue Articles
More Brand Name Archives Issue Articles

Sponsored Recommendations

Request a quote: Micro 3D Printed Part or microArch micro-precision 3D printers

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

How to Tune Servo Systems: The Basics

April 10, 2024
Learn how to tune a servo system using frequency-based tools to meet system specifications by watching our webinar!

Precision Motion Control for Sample Manipulation in Ultra-High Resolution Tomography

April 10, 2024
Learn the critical items that designers and engineers must consider when attempting to achieve reliable ultra-high resolution tomography results here!

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!