New laser-passivation method increases efficiency of leading-edge LEDs

April 15, 2019
Water molecules in the surrounding air passivate sulfur deficiencies in MoS2 monolayers used for LEDs and other devices.

Scientists at the U.S. Naval Research Laboratory (NRL; Washington, DC) have discovered a new method to passivate defects in next-generation monolayer optical materials to improve optical quality and enable the miniaturization of monolayer-based LEDs and other optical elements.1

The NRL scientists developed a laser-processing technique to significantly improve the optical properties of monolayer molybdenum disulphide (MoS2), a direct gap semiconductor, with high spatial resolution. Their process produces a 200-fold increase in the material's optical-emission efficiency in the areas written with the laser beam. The resulting passivation is stable in air and vacuum.

"From a chemistry standpoint, we have discovered a new photocatalytic reaction using laser light and water molecules, which is new and exciting," says Saujan Sivaram, one of the researchers. "From a general perspective, this work enables the integration of high quality, optically active, atomically thin material in a variety of applications, such as electronics, electro-catalysts, memory, and quantum computing applications."

According to Sivaram, atomically thin layers of transition metal dichalcogenides (TMDs), such as molybdenum disulfide (MoS2), are promising components for flexible devices, solar cells, and photosensors due to their high optical absorption and direct band gap.

"These semiconducting materials are particularly advantageous in applications where weight and flexibility are a premium," he says. "Unfortunately, their optical properties are often highly variable and nonuniform, making it critical to improve and control the optical properties of these TMD materials to realize reliable high-efficiency devices. Defects are often detrimental to the ability of these monolayer semiconductors to emit light. These defects act as nonradiative trap states, producing heat instead of light; therefore, removing or passivating these defects is an important step towards high-efficiency optoelectronic devices."

In a traditional LED, approximately 90% of the device is a heat sink to improve cooling. Reduced defects enable smaller devices to consume less power, which results in a longer operational lifetime for distributed sensors and low-power electronics.

Passivation via water molecules

The researchers demonstrated that water molecules passivate the MoS2 only when exposed to laser light with an energy above the band gap of the TMD. The result is an increase in photoluminescence with no spectral shift. Treated regions maintain a strong light emission compared to the untreated regions that exhibit much a weaker emission. This suggests that the laser light drives a chemical reaction between the ambient gas molecules and the MoS2.

"The results of this study pave the way for the use of TMD materials critical to the success of optoelectronic devices and relevant to the Department of Defense mission," says Berend Jonker, senior scientist and principal investigator.

Source: https://www.nrl.navy.mil/Media/News/Article/2504431/nrl-develops-laser-processing-method-to-increase-efficiency-of-optoelectronic-d

REFERENCE:
1. Saujan V. Sivaram et al., ACS Applied Materials & Interfaces (2019); doi: 10.1021/acsami.9b00390.

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

Request a quote: Micro 3D Printed Part or microArch micro-precision 3D printers

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

How to Tune Servo Systems: The Basics

April 10, 2024
Learn how to tune a servo system using frequency-based tools to meet system specifications by watching our webinar!

Precision Motion Control for Sample Manipulation in Ultra-High Resolution Tomography

April 10, 2024
Learn the critical items that designers and engineers must consider when attempting to achieve reliable ultra-high resolution tomography results here!

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!