Zecotek LFS scintillation crystals near approval for use at CERN Large Hadron Collider

Aug. 21, 2014
Zecotek Photonics says it is now close to having its patented LFS scintillation crystals approved for use at the European Organization for Nuclear Research (CERN) Large Hadron Collider.

Developer of photonics technologies for industrial, healthcare, and scientific markets, Zecotek Photonics (Richmond, BC, Canada) says it is now close to having its patented LFS (Lutetium Fine Silicate) scintillation crystals approved for use at the European Organization for Nuclear Research (CERN) in Switzerland. The Compact Muon Solenoid (CMS) Experiment has requested specially designed plates of LFS-3 crystals for testing as part of another major CMS experiment for the new Large Hadron Collider (LHC) at CERN. This announcement comes after a thorough examination of competing materials by CERN`s scientists and engineers. The request is in addition to one of Zecotek's LFS crystal designs already being considered for another of CERN's major experiments.

RELATED ARTICLE: Zecotek wins $500K order from Hamamatsu for PET scintillation crystals

"We are pleased with the performance of Zecotek's new LFS-3 configuration using plates geometry and we are confident that it will pass all the prerequisites needed for the new electromagnetic calorimeter part of CERN's LHC and CMS upgrades, said Michael Arenton, senior research scientist with the CERN LHC Scintillation Material project and senior member of the Experimental High Energy Physics group at the University of Virginia. "We look forward to receiving a positive decision to use LFS-3 in this important part of CERN’s major experiments."

"This is another important step in the evaluation of our patented LFS-3 scintillation crystals for use in experiments at CERN," said A.F. Zerrouk, chairman, president, and CEO of Zecotek Photonics. "Our LFS crystal is a prime candidate for the high energy experiments because of its density of material, stopping power, fast decay time, very good energy resolution, and radiation hardness. The overall experiment benefits from reduced labour and re-calibration costs associated with single crystal forms and less interruptions associated with the maintenance and refitting of damaged crystals. The new and improved crystal plate design is a significant breakthrough for this experiment. We look forward to a timely implementation."

The CMS Experiment is one of two large general-purpose particle physics detectors built on the LHC at CERN in Europe. The three main components of the LHC are scintillation materials, photo-detectors and the ubiquitous electronic system. As part of the new upgrade at the LHC, Zecotek's new LFS-3 crystal configuration is a prime candidate for one of the major components of CMS experiment.

The goal of the CMS Experiment is to investigate a wide range of physics, including the search for the Higgs boson, extra dimensions, and particles that could make up dark matter. It has been designed and built to replace an electromagnetic calorimeter for the end cap regions of the detector, known as "Shashlik". The Shashlik consists of a stack of tungsten plates and scintillating crystal layers. The whole detector would require just under 2 million of Zecotek's newly designed LFS-3 plates. The implementation schedule will coincide with the restart of the LHC in 2015.

In March 2013, CERN scientists confirmed that a new subatomic particle discovered at the world's most powerful particle accelerator is the Higgs Boson. As CERN pushes into this new frontier of science, additional experiments are required to determine the particle’s properties and its true form. High-energy scintillation crystals with high radiation hardness and solid-state photo detectors are paramount for the success of the next stage of experiments. Zecotek is also waiting for approvals on the installation of its patented LFS-3 scintillation crystals and solid-state MAPD photodetector for other major CERN experiments as part of the new LHC upgrades.

SOURCE: Zecotek Photonics; http://www.zecotek.com/EN/426/

Sponsored Recommendations

Melles Griot® XPLAN™ CCG Lens Series

March 19, 2024
IDEX Health & Science sets a new standard with our Melles Griot® XPLAN™ CCG Lens Series fluorescence microscope imaging systems. Access superior-quality optics with off-the-shelf...

Spatial Biology

March 19, 2024
Spatial Biology refers to the field that integrates spatial information into biological research, allowing for the study of biological systems in their native spatial context....

Custom-Engineered Optical Solutions for Your Application

March 19, 2024
We combine advanced optical design and manufacturing technology, with decades of experience in critical applications, to take you from first designs to ongoing marketplace success...

Semrock Optical Filters Resources

March 19, 2024
Looking for more information about Semrock optical filters? Explore sets by fluorophore, download the 2023 Semrock catalog and more.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!