iC-Haus replaces red (or IR) with blue light in optical encoders to increase their resolution

Feb. 4, 2015
iC-Haus has developed sensor chips for optical position encoders that use photodiodes designed especially for light from blue LEDs.

iC-Haus (Bodenheim, Germany) has developed sensor chips for optical position encoders that use photodiodes designed especially for light from blue LEDs. Ordinarily, optical encoders are designed for use with light from red or infrared LEDs.

The company says that the shorter wavelength and penetration of blue-light photons improve the resolution, signal amplitude, harmonic distortion, and jitter performance of incremental and absolute encoders. Blue light causes less diffraction at the same slot width compared to red or IR light, thus resulting in sharper imaging.

Modern semiconductor processes can produce small, shallow structures that can take advantage of the shorter penetration of blue light to improve efficiency. In addition, the smaller structures allow an interlaced photodiode layout that produces sine and cosine encoder signals with lower offset. A high fill factor for the photosensitive areas is achieved by an equivalent geometrical transformation, says iC-Haus, which notes that the integration platform for such single chip encoders is denoted by the trademark "Encoder blue."

The encoder chips of the iC-PT H-Series combine scanning and signal interpolation in a flat 5 x 5 mm² optoQFN package with a plane window. A scanning area of 1.9 x 3.1 mm is sufficient to generate 10,000 pulses per revolution using a code disc of 26 mm diameter (in one example).

The devices generate low-jitter encoder quadrature signals with index in single, double, and fourfold resolution. Output frequencies of up to 1.6 MHz are permitted, enabling motor speed control at up to 10,000 rpm with 10,000 pulses per revolution.

For more information, see http://www.ichaus.com/encoder-blue

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

Brain Computer Interface (BCI) electrode manufacturing

Jan. 31, 2025
Learn how an industry-leading Brain Computer Interface Electrode (BCI) manufacturer used precision laser micromachining to produce high-density neural microelectrode arrays.

Electro-Optic Sensor and System Performance Verification with Motion Systems

Jan. 31, 2025
To learn how to use motion control equipment for electro-optic sensor testing, click here to read our whitepaper!

How nanopositioning helped achieve fusion ignition

Jan. 31, 2025
In December 2022, the Lawrence Livermore National Laboratory's National Ignition Facility (NIF) achieved fusion ignition. Learn how Aerotech nanopositioning contributed to this...

Nanometer Scale Industrial Automation for Optical Device Manufacturing

Jan. 31, 2025
In optical device manufacturing, choosing automation technologies at the R&D level that are also suitable for production environments is critical to bringing new devices to market...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!