Cornell researchers shed light on light-emitting nanodevice

Oct. 10, 2007
October 10, 2007, Ithaca, NY--An interdisciplinary team of Cornell nanotechnology researchers has unraveled some of the fundamental physics of a material that holds promise for light-emitting, flexible semiconductors.

October 10, 2007, Ithaca, NY--An interdisciplinary team of Cornell nanotechnology researchers has unraveled some of the fundamental physics of a material that holds promise for light-emitting, flexible semiconductors.

The discovery, which involved years of perfecting a technique for building a specific type of light-emitting device, is reported in the Sept. 30 online publication of the journal Nature Materials.

The interdisciplinary team had long studied the molecular semiconductor ruthenium tris-bipyridine. For many reasons, including its ability to allow electrons and holes (spaces where electrons were before they moved) to pass through it easily, the material has the potential to be used for flexible light-emitting devices. Sensing, microscopy and flat-panel displays are among its possible applications.

The researchers set out to understand the fundamental physics of the material--that is, what happens when it encounters an electric field, both at the interfaces and inside the film. By fabricating a device out of the ruthenium metal complex that was spin-coated onto an insulating substrate with pre-patterned gold electrodes, the scientists were able to use electron force microscopy to measure directly the electric field of the device.

A long-standing question, according to George G. Malliaras, associate professor of materials science and engineering, director of the Cornell NanoScale Science and Technology Facility and one of the co-principal investigators, was whether an electric field, when applied to the material, is concentrated at the interfaces or in the bulk of the film.

The researchers discovered that it was at the interfaces-- two gold metal electrodes sandwiching the ruthenium complex film--which was a huge step forward in knowing how to build and engineer future devices.

"So when you apply the electric field, ions in the material move about, and that creates the electric fields at the interfaces," Malliaras explained.

Essential to the effort was the ability to pattern the ruthenium complex using photolithography, a technique not normally used with such materials and one that took the researchers more than three years to perfect, using the knowledge of experts in nanofabrication, materials and chemistry.

The patterning worked by laying down a gold electrode and a polymer called parylene. By depositing the ruthenium complex on top of the parylene layer and filling in an etched gap between the gold electrodes, the researchers were then able to peel the parylene material off mechanically, leaving a perfect device.

Ruthenium tris-bipyridine has energy levels well suited for efficient light emission of about 600 nm, said Héctor Abruña, the E.M. Chamot Professor of Chemistry, and a principal co-investigator. The material, which has interested scientists for many years, is ideal for its stability in multiple states of oxidation, which, in turn, allows it to serve as a good electron and hole transporter. This means that a single-layer device can be made, simplifying the manufacturing process.

Among the other authors were co-principal investigators Harold G. Craighead, the C.W. Lake Jr. Professor of Engineering, and John A. Marohn, associate professor of chemistry and chemical biology.

Sponsored Recommendations

High-speed cameras offer UV-extended capability

Nov. 25, 2023
The Phantom T3610, T2410, and TMX high-speed cameras (TMX 7510/6410/5010) are available in a UV variant.

Linear voice coil motors offer peak force of 2.20 N

Nov. 24, 2023
The LVCM-013-032-02M and LVCM-013-032-02 are 12.7 mm diameter linear voice coil motors.

Image sensor has use in home and professional security

Nov. 23, 2023
The OS08C10 image sensor features both staggered high dynamic range (HDR) and single exposure dual analog gain (DAG).

Image sensor has use in home and professional security

Nov. 23, 2023
The OS08C10 image sensor features both staggered high dynamic range (HDR) and single exposure dual analog gain (DAG).

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!