December 13, 2007, London--Detection and treatment of tumors, diseased blood vessels, and other soft-tissue conditions could be significantly improved, thanks to an innovative imaging system being developed that uses both light and sound.
The system uses extremely short pulses of low-energy laser light to stimulate the emission of ultrasonic acoustic waves from the tissue area being examined. These waves are then converted into high-resolution 3D images of tissue structure.
This method can be used to reveal disease in types of tissue that are more difficult to image using techniques based on x-rays or conventional ultrasound. For example, the new system is better at imaging small blood vessels, which may not be picked up at all using ultrasound. This is important in the detection of tumors, which are characterized by an increased density of blood vessels growing into the tissue.
The technique, which is completely safe, will help doctors diagnose, monitor, and treat a wide range of soft-tissue conditions more effectively. The first of its kind in the world, the prototype system has been developed by medical physics and bioengineering experts at University College London, with funding from the Engineering and Physical Sciences Research Council (EPSRC). It is soon to undergo trials in clinical applications, with routine deployment in the healthcare sector envisaged within five years.
The emission of an acoustic wave when matter absorbs light is known as the photoacoustic effect. Harnessing this basic principle, the new system makes use of the variations in the sound waves that are produced by different types of soft human tissue to identify and map features that other imaging methods cannot distinguish so well.
By appropriate selection of the wavelength of the laser pulses, the light can be controlled to penetrate up to depths of several centimeters. The technique therefore has important potential for the better imaging of conditions that go deep into human tissue, such as breast tumors, and for contributing to the diagnosis and treatment of vascular disease.
The prototype instrument, however, has been specifically designed to image very small blood vessels (with diameters of microns) relatively close to the surface. Information generated about the distribution and density of these microvessels can in turn provide valuable data about skin tumors, vascular lesions, burns, other soft tissue damage, and even how well an area of tissue has responded to plastic surgery following an operation.
The development process has included theoretical and experimental investigations of photoacoustic interactions with soft tissue, development of appropriate computer image-reconstruction algorithms, and construction of a prototype imaging instrument incorporating the new technique.
"This new system offers the prospect of safe, non-invasive medical imaging of unprecedented quality," says Dr. Paul Beard, who leads UCL's Photoacoustic Imaging Group. "It also has the potential to be an extremely versatile, relatively inexpensive and even portable imaging option."
The nanosecond pulses of laser light used by the new system are of near-infrared wavelength. The light causes the target tissue to undergo a tiny rise in temperature and a tiny expansion, both of which contribute to the generation of a small ultrasonic acoustic wave. Ultrasonic acoustic waves have frequencies above 20 kHz (the normal range of human hearing). The new system generates waves in the range from 1 to 50 MHz.
With conventional ultrasound, a pulse of sound is transmitted into an area of tissue, which generates a signal that is reflected back and used to construct an image. However, when examining very small blood vessels, the size of the ultrasound signal reflected back is very small. This is because the mechanical and elastic properties of blood vessels are similar to those of the surrounding tissue, making them difficult to distinguish from each other. (It is the mechanical and elastic properties that the ultrasound is imaging.) In contrast, photoacoustic imaging is based on a very different mechanism, in that it uses the absorption of light to generate a signal (specifically, a sound wave). The reason that this technique is so good at imaging blood vessels in particular is that hemoglobin in the blood absorbs light very strongly, producing a large signal.
The design of the current prototype instrument is optimized for imaging close to the surface with high spatial resolution*. This is a consequence of the completely new type of optical detector that has been developed for use in the prototype system.** The technique is also capable of imaging deeper (to several centimeters) if piezoelectric detectors are used instead. However, this comes at a cost of reduced spatial resolution.
* Spatial resolution refers to the sharpness of an image, i.e. how well the edges of the objects shown are defined.
**The prototype instrument is the first of its kind in the world, because of the completely new type of detector it uses, which employs optical means to detect the photoacoustic signal. This enables the system to generate high-resolution images of superficial tissues.
The new technique is less well suited to imaging bone. Bone's hard surface can cause strong reflections of acoustic waves, which can lead to the creation of ghost images. Moreover, if trying to image through bone (e.g. the skull), a significant proportion of the sound energy will be reflected; this will reduce the detected signals.
For more information, visit http://www.medphys.ucl.ac.uk/research/mle/index.htm