Recent tests have shown that coatings from Laser Components achieve the highest damage thresholds available for solid-state lasers. These damage thresholds were tested at the Laser Zentrum Hanover and the damage threshold measurement values were determined using a Spectra Physics laser (780 nm, 1 kHz repetition rate, 140 fs pulse length) according to ISO 11254-2. These thresholds are available in coatings for Q-switched lasers at 1064, 532, 355, or 266 nm. Coatings for short-pulse lasers at 800 nm also exhibit excellent damage thresholds.
Laser Components
Hudson, NH
www.lasercomponents.com
Posted by C. Settino, www.laserfocusworld.com
_______________
PRESS RELEASE
Tests Show Highest Damage Threshold Results
High-Power Titanium Sapphire Coatings
The more than twenty years of experience in the field of coatings are paying off. Tests have proven that LASER COMPONENTS achieves the highest damage thresholds available on the market for solid state laser coatings.
This includes, for example, coatings for Q-switched lasers at 1064 nm, 532 nm, 355 nm, or 266 nm. Coatings for short pulse lasers at 800 nm also exhibit excellent damage thresholds.
These damage thresholds were tested at the Laser Zentrum Hanover. The damage threshold measurement values were determined using a Spectra Physics laser (780 nm, 1 kHz repetition rate, 140 fs pulse length) according to ISO 11254-2.
Additional information is available in the new Optics catalog or directly from www.lasercomponents.com.