picoEmerald is compact, all-in-one ultrafast CARS light source

May 1, 2009
APE and High Q Laser have jointly introduced the picoEmerald, a remote-controlled, hands-free one-box CARS light source that provides pump and Stokes pulses perfectly overlapped in space and time. The picoEmerald contains a high-power picosecond oscillator (1064 nm) with a frequency doubler and a synchronously pumped OPO in a single housing.

APE and High Q Laser have jointly introduced the picoEmerald, a remote-controlled, hands-free one-box CARS light source that provides pump and Stokes pulses perfectly overlapped in space and time. The picoEmerald contains a high-power picosecond oscillator (1064 nm) with a frequency doubler and a synchronously pumped OPO in a single housing. The optical modules are optimized to exhibit maximum passive stability; an active resonator control continually maximizes efficiency of the high-power picosecond oscillator and the OPO. This is an easy-to-use source for researchers in biology, medical, and other life sciences. APE will present picoEmerald at LASER in Munich.
APE Angewandte Physik und Elektronik
Berlin, Germany
www.ape-berlin.com

Posted by C. Settino, www.laserfocusworld.com


______________
PRESS RELEASE

A new compact all-in-one ultrafast CARS light source APE presents picoEmerald at LASER in Munich

As CARS microscopy has been moving out of physics labs into life science institutions the demand for an easy to use and turnkey light source increased. The conjoint answer of the companies APE and High Q Laser is the picoEmerald, a remote controlled, truly hands-free one-box CARS light source, providing Pump- and Stokes pulses perfectly overlapped in space and time.

The picoEmerald comprises a high power picosecond oscillator (1064 nm) with a frequency doubler and a synchronously pumped OPO in a single housing. The optical modules were optimized by finite element
analysis and mechanical stability algorithms (misalignment stability optimization) to exhibit maximum passive stability. In addition an active resonator control is maximizing continuously the efficiency of the high-power picosecond oscillator and the OPO. The picoEmerald supplies three temporally and spatially overlapping ultrafast pulse trains: 1064 nm out of the laser oscillator itself and 690 nm … 990 nm (Signal range) and 1150 nm … 2300 nm (Idler range) from the OPO. The wavelength tuning occurs automatically by PC. Due to the use of a synchronously pumped OPO pumped by a modelocked solid state laser the pulses show no timing jitter and a very low noise level.

Best spectroscopic resolution requires a picosecond excitation with a typical bandwidth of ~10 cm-1. The picoEmerald delivers 7 ps at 1064 and 5-6 ps from the OPO to match this requirement. Independent power adjustments of the 1064 nm beam and the OPO Signal and Idler, sensors for the spatial and temporal overlap and a high resolution spectrometer are included. 1064 nm pulses and OPO Idler pulses can be independently combined with the OPO Signal or blocked. The standard CARS set up is utilizing the 1064 nm as Stokes and the Signal pulse train as Pump with an energy difference from 700 to 5000 cm-1. Other CARS set-ups are using the Signal and Idler pulse trains (1400 to 10.000 cm-1) for
higher penetration depths due to the red shifted excitation wavelengths.

The specified 750 mW for both1064 nm and the OPO-Signal output as well as 600 mW for the OPO-Idler provide more than enough power for CARS and coherent Raman microscopy.

With the picoEmerald researchers in biology, medical and other life sciences get an easy to use light source for CARS microscopy. As a next step microscope manufacturers will integrate the picoEmerald into their confocal microscope systems and offer complete CARS imaging systems to life science users.

APE presents the picoEmerald at the LASER – World of Photonics, Hall B1 – Booth 116
Contakt: APE Angewandte Physik und Elektronik GmbH, Gerd Arno Schwiedergall, Plauener Str. 165-167 / Haus N, 13053 Germany, Telefon: +49 (0)30 986 011 352, [email protected],
www.ape-berlin.com

Sponsored Recommendations

Brain Computer Interface (BCI) electrode manufacturing

Jan. 31, 2025
Learn how an industry-leading Brain Computer Interface Electrode (BCI) manufacturer used precision laser micromachining to produce high-density neural microelectrode arrays.

Electro-Optic Sensor and System Performance Verification with Motion Systems

Jan. 31, 2025
To learn how to use motion control equipment for electro-optic sensor testing, click here to read our whitepaper!

How nanopositioning helped achieve fusion ignition

Jan. 31, 2025
In December 2022, the Lawrence Livermore National Laboratory's National Ignition Facility (NIF) achieved fusion ignition. Learn how Aerotech nanopositioning contributed to this...

Nanometer Scale Industrial Automation for Optical Device Manufacturing

Jan. 31, 2025
In optical device manufacturing, choosing automation technologies at the R&D level that are also suitable for production environments is critical to bringing new devices to market...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!