Light-emitting biomaterial promising for tumor imaging, enviro research, "green" products

Aug. 17, 2009
August 17, 2009--A new material that couples light-emitting dye with a biopolymer has been shown to simplify the imaging of tumor regions that indicate cancer aggressiveness. The bio-safe, renewable, and biodegradable oxygen nanosensing polymer is easy and inexpensive to fabricate in many forms, including films, fibers and nanoparticles. Other applications include imaging agents for visualizing fluid and aerodynamics, and sensors for food and drug packaging and environmental monitoring.

August 17, 2009--A new material that couples a light-emitting dye with a biopolymer has been shown to simplify the imaging of oxygen-deficient regions of tumors. Such tumors are associated with increased cancer aggressiveness and are particularly difficult to treat.

The light-emitting material serves as an oxygen nanosensor--which represents a class of powerful new research tools that one day may also be used for the diagnosis and detection of diseases and for planning treatment strategies. Chemists at the University of Virginia, developed it, and consulted with cancer researchers at the U.Va. Cancer Center and Duke University Medical Center to determine possible applications. The material, which combines "green" chemistry with nanotechnology, is reported in the current online edition of the journal Nature Materials.

The new material is based on poly(lactic acid), a biorenewable, biodegradable polymer that is safe for the body and the environment, and is easy and inexpensive to fabricate in many forms, including films, fibers and nanoparticles. It is useful for medical research as well as environmental research, sustainable design and green products, too.

Guoqing Zhang, a U.Va. chemistry doctoral candidate, working with Cassandra Fraser, a U.Va. chemistry professor, synthesized the new material by combining a corn-based biopolymer with a dye that is both fluorescent and phosphorescent. The phosphorescence appears as a long-lived afterglow that is only evident under low oxygen or oxygen-free conditions.

Zhang devised a method to adjust the relative intensities of short-lived blue fluorescence and long-lived yellow phosphorescence, ultimately creating a calibrated colorful glow that allows visualization of even minute levels of oxygen. The biomaterial displays its oxygen-sensitive phosphorescence at room or body temperature, making it ideal for use in tissues.

"We were amazed at how easy the material was to synthesize and fabricate as films and nanoparticles, and how useful it is for measuring low oxygen concentrations," Fraser said.

"It is based on a bio-friendly material," added Zhang. "It is safe for the body and the environment, and so we realized it could have applications not just for medical research and developing improved disease treatments, but also for new sustainable technologies."

Cancer researchers at Duke quickly realized that the new material could be particularly useful for real-time and extended-time spatial mapping of oxygen levels in tumors. This is important because a lack of sufficient oxygen in tumors – called "hypoxia" – is a major source of resistance to radiation and chemotherapy treatment, and promotes a greater degree of malignancy.

"We have found that these nanoparticles were directly applicable to our existing tumor models," said Greg Palmer, assistant professor of radiation oncology at Duke University Medical Center. "This technology will enable us to better characterize the influence of tumor hypoxia on tumor growth and treatment response."

Researchers and clinicians have long sought effective ways to locate and map low-oxygen areas in the body to better understand normal and disease processes. Presently, there are no simple, easy or inexpensive methods, preclinical or clinical, for generating oxygen maps of tumors and surrounding tissues with good spatial and temporal resolution.

"The method developed here holds great promise for being able to perform measurements of tumor hypoxia cost-effectively," said study co-author Mark Dewhirst, a professor of radiation oncology, pathology and biomedical engineering at Duke. "This kind of tool could greatly increase our knowledge about methods to eliminate tumor hypoxia, which could lead to more effective treatments."

"Tumors that have insufficient oxygen tend to be more likely to spread from the primary site to other parts of the body," added Michael Weber, director of U.Va.'s Cancer Center. "Despite the overall importance of tumor hypoxia, it is very difficult to measure directly and most methods that are available are very expensive."

The new material currently is being used in preclinical studies to gain insight into cancer biology and treatment response, which could be useful for drug development and testing.

"This technology enables entirely new insights to be obtained, allowing imaging of tumor hypoxia on the scale of tumor cells and small blood vessels," Palmer said.

Eventually the material could be used as an injectable nanosensor, potentially providing continual data on oxygen levels, biological processes and therapy responsiveness.

Hypoxia also is linked to cardiovascular disease, stroke and diabetes, so the material developed by Zhang and Fraser could have applications in several areas of medicine.

Applications for the light-emitting biomaterial beyond medicine include molecular probes for cell biology, imaging agents for visualizing fluid and aerodynamics, and oxygen sensors for food and drug packaging, tamper resistant seals, and environmental monitoring, such as measuring oxygen levels in bodies of water.

For more information see the paper, A dual-emissive-materials design concept enables tumour hypoxia imaging, in Nature Materials.

Posted by Barbara G. Goode, [email protected], for Laser Focus World.

Sponsored Recommendations

Request a quote: Micro 3D Printed Part or microArch micro-precision 3D printers

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a Micro 3D Printed Benchmark Part: Send us your file.

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

How to Tune Servo Systems: The Basics

April 10, 2024
Learn how to tune a servo system using frequency-based tools to meet system specifications by watching our webinar!

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!