Bodkin Design gets SBIR to develop switchable polarimetric camera for unmanned aircraft systems

Dec. 17, 2012
Newton, MA--Bodkin Design & Engineering, LLC (BD&E) was awarded a Phase I Small Business Innovation Research program (SBIR) contract by the U.S. Air Force to develop a switchable polarizing camera element for aerial surveillance from unmanned aerial vehicles (UAVs).

Newton, MA--Bodkin Design & Engineering, LLC (BD&E) was awarded a Phase I Small Business Innovation Research program (SBIR) contract by the U.S. Air Force to develop a switchable polarizing camera element for aerial surveillance from unmanned aerial vehicles (UAVs). When retrofitted to an IR camera, the device can switch from high-resolution IR imaging mode to a polarimetric IR imaging mode.

Polarimetric imaging can improve the detection of targets under tree canopies, in camouflage, and in cluttered environments, separating man-made objects such as vehicles and buildings from clutter in a reconnaissance scene. Flat surfaces on these objects partially polarize both reflected light and thermally emitted radiation.

Current polarimetric imaging technology uses either multiple cameras with multiple filters or a single camera with time multiplexing. Multiple cameras and filters yield high-resolution polarimetric images of the scene, but lead to large and expensive systems. Time multiplexing produces high-resolution imagery but at a slower data rate and can suffer from temporal artifacts.

BD&E is designing an instrument that will map polarimetric information simultaneously onto a single focal plane, with the focal plane divided into sections for each type of information; this eliminates temporal artifacts and makes a more rugged imager, says BD&E. The design has no moving parts, is compact and adaptable to existing camera systems, and can rapidly switch between polarimetric and high-resolution imagery.

BD&E has contracts with the U.S. Army, Air Force, Navy, and Missile Defense Agency for several optical-engineering projects.

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!