MIT to build $350 million building for nanotechnology research

April 29, 2014
The Massachusetts Institute of Technology (MIT; Cambridge, MA) will construct a new 200,000-square-foot building, called “MIT.nano,” to be finished by 2018; at the center of the MIT campus, MIT.nano will house state-of-the-art cleanroom, imaging, and prototyping facilities supporting research on nanoscale materials and processes.

The Massachusetts Institute of Technology (MIT; Cambridge, MA) will construct a new 200,000-square-foot building, called “MIT.nano,” to be finished by 2018; at the center of the MIT campus, MIT.nano will house state-of-the-art cleanroom, imaging, and prototyping facilities supporting research on nanoscale materials and processes.

An estimated 2000 MIT researchers may ultimately make use of the building, says electrical engineering professor Vladimir Bulović, faculty lead on the MIT.nano project and associate dean for innovation in the School of Engineering. Research will occur in fields that include energy, health, life sciences, quantum sciences, electronics, and manufacturing.

EMI- and vibration-isolated space

MIT.nano will house two interconnected floors of cleanroom laboratories containing fabrication spaces and materials growth laboratories. The building will also include a floor optimized for low vibration and minimal electromagnetic interference (EMI), dedicated to advanced imaging technologies. The facility will also include teaching and research space, known as a computer-aided visualization environment (CAVE), allowing high-resolution views of nanoscale features.

MIT.nano will use heat-recovery systems on the building’s exhaust vents. The building will also be able to sense the local cleanroom environment and adjust the need for air exchange, reducing MIT.nano’s energy consumption.

An estimated one-quarter of MIT’s graduate students and 20% of its researchers will make use of the facility, says Bulović.

Source: http://newsoffice.mit.edu/2014/new-building-will-be-hub-for-nanoscale-research-0429

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

Working with Optical Density

Feb. 26, 2025
Optical Density, or OD, is a convenient tool used to describe the transmission of light through a highly blocking optical filter.

Custom-Engineered Optical Solutions for Your Application

Feb. 26, 2025
Explore the newest and most widely used applications of Semrock optical filters.

Linear Stages & Rotary Stages for High Precision Automation & Motion Control

Feb. 13, 2025
Motorized Linear Translation Stages & Rotary Precision Positioning Stages for High Performance Automation & Motion Control | PI USA

Motion Controllers for Precision Positioning and Automation

Feb. 13, 2025
PI manufactures a range of precision motion controllers and drivers for positioning systems, including stepper motors, brushless motors, and servo motors.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!