Inorganic-organic hybrid polymer captures more wavelengths more efficiently

Oct. 20, 2008
October 20, 2008--Researchers at Ohio State University have created a new polymer material that absorbs all wavelengths of the visible spectrum using triplet states.

October 20, 2008--Researchers have created a new material that overcomes two of the major obstacles to solar power: it absorbs all the energy contained in sunlight, and generates electrons in a way that makes them easier to capture. Ohio State University (Columbus, OH) chemists and their colleagues combined electrically conductive plastic with metals including molybdenum (Mo) and tungsten (W) to create the hybrid material.

"There are other such hybrids out there, but the advantage of our material is that we can cover the entire range of the solar spectrum," explained Malcolm Chisholm, distinguished university professor and chair of the department of chemistry at Ohio State. "We can get absorption from 300 to 1000 nm by varying the metal combinations and the number of thienyl rings. Using up to three rings fills in almost all the solar spectrum," says Chisholm (see Fig.). The study appears in the current issue of the Proceedings of the National Academy of Sciences (PNAS).

Sunlight contains the entire spectrum of visible colors that can be seen with the naked eye--all the colors of the rainbow. Today's solar-cell materials can only capture a small range of frequencies, so they can only capture a small fraction of the energy contained in sunlight. This new material is the first that can absorb all the energy contained in visible light at once.

The material generates electricity just like other solar cell materials do: light energizes the atoms of the material, and some of the electrons in those atoms are knocked loose. Ideally, the electrons flow out of the device as electrical current, but this is where most solar cells run into trouble. The electrons only stay loose for a tiny fraction of a second before they sink back into the atoms from which they came. The electrons must be captured during the short time they are free, and this task, called charge separation, is difficult.

In the new hybrid material, electrons remain free much longer than ever before. To design the hybrid material, the chemists explored different molecular configurations on a computer at the Ohio Supercomputer Center. Then, with colleagues at National Taiwan University (Taipei, Taiwan), they synthesized molecules of the new material in a liquid solution, measured the frequencies of light the molecules absorbed, and also measured the length of time that excited electrons remained free in the molecules.

They saw something very unusual. The molecules didn't just fluoresce as some solar-cell materials do. They phosphoresced as well. Both luminous effects are caused by a material absorbing and emitting energy, but phosphorescence lasts much longer.

To their surprise, the chemists found that the new material was emitting electrons in two different energy states--a singlet state and a triplet state. Both energy states are useful for solar-cell applications, and the triplet state lasts much longer than the singlet state.

Electrons in the singlet state stayed free for up to 12 picoseconds, or trillionths of a second--not unusual compared to some solar-cell materials. But electrons in the triplet state stayed free 7 million times longer--up to 83 microseconds, or millionths of a second. When they deposited the molecules in a thin film, similar to how they might be arranged in an actual solar cell, the triplet states lasted even longer: 200 microseconds.

"This long-lived excited state should allow us to better manipulate charge separation," Chisholm said.

At this point, the material is years from commercial development, but he added that this experiment provides a proof of concept--that hybrid solar-cell materials such as this one can offer unusual properties.

The project was funded by the National Science Foundation and Ohio State's Institute for Materials Research. Chisholm is working with Arthur J. Epstein, distinguished university professor of chemistry and physics; Paul Berger, professor of electrical and computer engineering and physics; and Nitin Padture, professor of materials science and engineering to develop the material further. That work is part of the Advanced Materials Initiative, one Ohio State's Targeted Investment in Excellence (TIE) programs.

Co-authors on the PNAS paper from Ohio State included: Gotard Burdzinski, a postdoctoral researcher; Yi-Hsuan Chou, a postdoctoral researcher; Florian Fiel, a former postdoctoral researcher; Judith Gallucci, a senior research associate; Yagnaseni Ghosh, a graduate student; Terry Gustafson, a professor; Yao Liu, a postdoctoral researcher; Ramkrishna Ramnauth, a former postdoctoral researcher; and Claudia Turro, a professor; all of the Department of Chemistry. They collaborated with Pi-Tai Chou and Mei-Lin Ho of National Taiwan University.

RELATED ARTICLES:

Thermo-photovoltaic cells reach new record effieciency

DOE invests $17.6 million in photovoltaic initiative

Sponsored Recommendations

Brain Computer Interface (BCI) electrode manufacturing

Jan. 31, 2025
Learn how an industry-leading Brain Computer Interface Electrode (BCI) manufacturer used precision laser micromachining to produce high-density neural microelectrode arrays.

Electro-Optic Sensor and System Performance Verification with Motion Systems

Jan. 31, 2025
To learn how to use motion control equipment for electro-optic sensor testing, click here to read our whitepaper!

How nanopositioning helped achieve fusion ignition

Jan. 31, 2025
In December 2022, the Lawrence Livermore National Laboratory's National Ignition Facility (NIF) achieved fusion ignition. Learn how Aerotech nanopositioning contributed to this...

Nanometer Scale Industrial Automation for Optical Device Manufacturing

Jan. 31, 2025
In optical device manufacturing, choosing automation technologies at the R&D level that are also suitable for production environments is critical to bringing new devices to market...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!