Battelle, MBARI, NOAA collaborate on NDIR spectroscopy system to predict climate change

Dec. 18, 2008
Battelle says it is working with the Monterey Bay Aquarium Research Institute (MBARI) and the National Oceanic and Atmospheric Association (NOAA) to manufacture and market a non-dispersive infrared (NDIR) spectroscopy-based device to will help scientists interpret and forecast climate change. The new instrument measures the partial pressure of carbon dioxide (pCO2) in the ocean and atmosphere.

Battelle says it is collaborating with the Monterey Bay Aquarium Research Institute (MBARI) and the National Oceanic and Atmospheric Association (NOAA) to manufacture and commercialize a non-dispersive infrared (NDIR) spectroscopy-based analytical instrument that will help scientists understand and predict global warming and climate changes.

This new analytical instrument measures the partial pressure of carbon dioxide (pCO2) in the ocean and atmosphere, which is needed to understand the global ocean uptake of atmospheric CO2. The need for ocean carbon measurements is becoming increasingly important because high levels of carbon dioxide in the oceans have led to ocean acidification in surface waters, which could have significant effects on a variety of marine organisms and ecosystems.

In 1992, MBARI scientists Gernot Friederich and Francisco Chavez realized the importance of collecting precise and frequent data regarding CO2 exchange between the ocean and the atmosphere in order to better understand climate change. They designed the pCO2 monitoring system using known gas-equilibration chemistry and state-of-the-art non-dispersive infrared (NDIR) spectroscopy. Measuring the partial pressure of CO2 gives scientists an idea of whether the ocean is acting as a source or sink of CO2 (relative to the atmosphere) at a given place and time. Such fluxes of CO2 vary dramatically from place to place and over time.

In 2003, MBARI transferred the technology to NOAA, where scientists and engineers improved the design to make it more robust, more accurate, and easily manufactured. A reference calibration gas and two-way satellite data transmission capabilities were added to control the system remotely and receive data in near real-time. "Our system has sustained continuous measurements over extended periods of time," said Dr. Christopher Sabine, Oceanographer, Ocean Climate Research Division, NOAA/PMEL.

The self-contained, modular design can be deployed on a wide variety of platforms. It is designed to operate unattended for more than 12 months at a time. Currently, more than a dozen systems are placed on a variety of buoys around the world. NOAA is using this system to develop a global array of moored observation systems to determine air-sea flux in support of the Global Ocean Observing System (GOOS).

The autonomous pCO2 monitoring system will be manufactured at Battelle's specialized scientific instrument manufacturing facility in Columbus and will be commercially available summer 2009. "This is a wonderful cooperative effort between two non-profit organizations and a government agency to bring this important technology to the broader oceanographic and scientific community," said Spencer Pugh, VP and Manager of Battelle's Industrial and International Market Sector.

Battelle is the world's largest non-profit independent research and development organization. For more information see Battelle's website.

About the Author

Barbara Gefvert | Editor-in-Chief, BioOptics World (2008-2020)

Barbara G. Gefvert has been a science and technology editor and writer since 1987, and served as editor in chief on multiple publications, including Sensors magazine for nearly a decade.

Sponsored Recommendations

Request a quote: Micro 3D Printed Part or microArch micro-precision 3D printers

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

How to Tune Servo Systems: The Basics

April 10, 2024
Learn how to tune a servo system using frequency-based tools to meet system specifications by watching our webinar!

Precision Motion Control for Sample Manipulation in Ultra-High Resolution Tomography

April 10, 2024
Learn the critical items that designers and engineers must consider when attempting to achieve reliable ultra-high resolution tomography results here!

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!