Explosives used to emboss holograms in steel

March 6, 2008, Pfinztal, Germany--"Explosive embossing" method embeds holograms into steel, wood, leather, or textiles at a very high resolution.

March 6, 2008, Pfinztal, Germany--People who handle explosives usually have heavy-duty tasks to perform--dislodging rocks, demolishing old buildings, or triggering an avalanche. But explosives can be used for delicate tasks, too: They make it possible to emboss holograms in steel.

Nearly everybody carries holograms around on banknotes, credit cards, or tickets for a pop concert. The colorful, iridescent interference images protect banknotes and documents against forgery. They take a great deal of effort to produce, and are almost impossible to copy. This is because the image is created not only by the interaction of different colors and contrasts, but also by the surface structure. Different pictures can be seen, depending on the direction from which the light is shining.

Holograms are normally produced with the aid of laser beams, starting by creating a prototype from photosensitive material such as Fotoresist. However, this template is too soft to be able to act as an embossing or injection-molding tool for holograms. Consequently, the filigree relief pattern is copied onto a harder material such as nickel by means of electroplating. Mounted on a roller, this nickel shim transfers the hologram onto a plastic film of the kind that can be seen on credit cards and concert tickets.

Researchers at the Fraunhofer Institute for Chemical Technology ICT in Pfinztal have now adopted a more radical method. The scientists are using explosives to impress holograms in steel. With the right dosage, explosives enable a template to be copied with far greater accuracy than by conventional methods. The "explosive embossing" method achieves a resolution in the two-figure nanometer range. "Nobody believed such a thing could be possible," raves ICT project manager Günter Helferich. Almost any structure, be it wood, leather, textiles or sand, can be rapidly and accurately impressed on metal in perfect detail with the aid of a sheet explosive.

The scientists are now working with industrial partners to create steel tools with holographic structures--as a "stamp" for applying holograms to plastic parts. The challenge is tremendous: The structures that have to be imprinted into the steel are so tiny that they cannot even be discerned under an optical microscope. The experts have optimized the method to the desired image sharpness through numerous series of experiments. The advantage of this method over electroplating is that it does not produce a soft nickel piece that quickly wears out, but a hard steel stamp. Steel treated in this way is also in demand in the plastics industry: Many plastic parts are designed to look decorative and attractive, particularly if they are placed in elegant surroundings.

--V.C.

More in Research