Laser distance measurement from TR Electronic has 0.2 to 240 m range

Aug. 17, 2012
The ProfiNET LE-200 laser distance measurement system is available with a variety of protocol options, including EtherNET/IP, DeviceNET, Profibus, Interbus, and CAN interfaces.

The ProfiNET LE-200 laser distance measurement system is available with a variety of protocol options, including EtherNET/IP, DeviceNET, Profibus, Interbus, and CAN interfaces. It is a standard position sensor with a measuring range of 0.2 to 240 m and accuracy of ± 2 mm, and is available with cooling and heating options for extreme environments.
TR Electronic
Troy, MI

[email protected]

More Products

-----

PRESS RELEASE

TR Electronic Adds ProfiNET to the LE-200 Absolute Laser Distance Measurement System

The new ProfiNET LE-200 laser distance measurement system from TR Electronic provides a communication option for customers looking for real-time, closed loop distance feedback application solutions. Incorporating TR’s phase-shift differential technology, the ProfiNET LE-200 provides accurate and reliable positioning technology with one of today’s leading industrial Ethernet interfaces.

The ProfiNET enabled LE-200 laser distance measurement system from TR Electronic provides a new interface option for challenging, longer-distance applications where traditional technology cannot deliver.

Laser-based measuring devices have generally been implemented with high-speed interfaces such as SSI or fieldbus technologies to provide the necessary response time for precision measurement. The LE-200 was the first long-range laser on the market available with EtherNET/IP and TR Electronic continues to support all leading industrial Ethernet protocols with the release of the ProfiNET version. The new ProfiNET option provides a clear migration path for those customers looking to maintain their control hardware platform. The LE-200 is also available with a variety of protocol options including EtherNET/IP, DeviceNET, Profibus, Interbus and CAN interfaces.

The LE-200 is a laser-based system where the emitter/receiver is positioned opposite a target (either a flat, clean surface or a specific reflective target) and as the distance between the two is varied, the position is evaluated and a corresponding value is transmitted from the device to the control system. Either the laser device, or its reflector, is fixed and the other end will move relative to it, depending on location of available power and control system wiring.

The ProfiNET LE-200 laser is a standard position sensing product with a measuring range of 0.2 – 240 metres. It has an accuracy rate of +/- 2mm and is available with cooling and heating options for the most extreme environments.

For common positioning applications including loop control, coil diameter measurement, automated warehousing, level and material control in silos, crane positioning and general material handling of parts or containers over large scanning distances, the LE-200 with ProfiNET allows for a seamless transition towards next generation communications in the industrial automation industry.

For additional information on TR's motion solutions or to speak with any member of their Customer Care Team, please call 1-800-265-9483, visit TR Electronic on-line at http://www.trelectronic.com or e-mail customercare(at)trelectronic(dot)com.

-----

Follow us on Twitter

Laser Focus World has gone mobile: Get all of the mobile-friendly options here.

Subscribe now to Laser Focus World magazine; it's free!

Sponsored Recommendations

Flexible, Thixotropic, One Component Dual Cure Epoxy

Dec. 1, 2023
Master Bond UV23FLDC-80TK is a moderate viscosity, cationic type system that offers both UV light and heat curing mechanisms. It cures readily within 20-30 seconds when exposed...

MRF Polishing

Dec. 1, 2023
Welcome to Avantier, your esteemed partner in optical solutions for over five decades. With a legacy of expert knowledge, we invite you to delve into the realm of precision optics...

Fluorescence Microscopy Part 1: Illuminating Samples for High-Resolution Imaging

Dec. 1, 2023
Illuminating Samples Fluorescence microscopy is a powerful imaging technique widely used in various fields, especially in biomedical research, to visualize and study fluorescently...

Photonics Business Moves: December 1, 2023

Dec. 1, 2023
Here are the top four photonics business moves that made headlines during the week ending December 1, 2023.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!