Micronor fiber-optic position sensor measures with 13 bit resolution
The Model MR330 series position sensor employs an all-optical design immune to any electromagnetic interference such as lightning, radiation, and magnetic fields, and other harsh environmental conditions. The fiber-optic position sensor (FOPS) measures absolute angular position from 0° to 360° with 13 bit (8192 count) resolution at speeds exceeding 2500 rpm.
Micronor
Newbury Park, CA
www.micronor.com
-----
PRESS RELEASE
WORLD'S FIRST FIBER OPTIC ABSOLUTE POSITION SENSOR PROVIDES EMI IMMUNITY AND 13-BIT RESOLUTION
Newbury Park, California, May 19, 2011
MICRONOR introduces the world's first commercially-available absolute Fiber Optic Position Sensor (FOPS). The Model MR330 series position sensor is an innovative all-optical design immune to any electro-magnetic interference such as lightening, radiation, magnetic fields and other harsh environmental conditions. The fiber optic aspect of the sensor also makes it perfectly suited for long distance position sensing over hundreds of meters without being affected by ground loop problems. The FOPS system is based on Micronor’s years of research, innovation and patents in fiber optic sensing technology.
The new absolute FOPS uses a novel optical technique embedded in a passive sensor and active controller connected by a duplex fiber optic link. The controller transmits a burst of light to the code disk in the sensor which accurately modulates the spectral components of the light based on angular position. The position information is imprinted in the optical spectrum of the light and guided back to the controller for a precise position readout. The sensor requires no electrical power and houses no electronic components whatsoever.
The MR330's accuracy and EMI immunity make it an ideal sensor for applications that require precise motion control and position measurement in challenging environments: oil rigs, satellite antennas, solar panel arrays, actuator systems, transportation systems, steel mills and medical instrumentation. The sensor is also classified as a “simple apparatus” and meets ATEX requirements for use in mines and other hazardous environments. The sensor's immunity to lightning make it especially suited for outdoor applications such as wind turbines and antennas.
This innovative product measures absolute angular position from 0° to 360° with 13-bit (8192 count) resolution at speeds exceeding 2500 rpm. A complete system consists of the MR332 Passive Sensor, and MR330 Controller which interconnect via a duplex fiber optic link. The fiber cable used is readily available industry standard 62.5/125µm multimode fiber with Duplex LC connections. The MR330 controller is powered by 24 VDC and features multiple built-in interfaces and protocols for position read-out making it compatible with most any motion systems.
The MR330 controller’s powerful embedded processor and firmware offers an extended set of built-in functions and multiple interface options not available in conventional encoders or resolvers. The Model MR330-1 SSI Controller offers SSI, USB, RS485 Serial, Modbus RTU, two analog outputs (4-20mA and ±10V) and two digital set points.
Unit price for a complete MR330 controller/MR332 sensor system is $5790 in small quantities with a typical lead time of 2-3 weeks ARO. Special versions can also be engineered for radiation environments, MRI applications and OEM product integration.
The debut of the MR330 series absolute position sensor complements Micronor's existing MR310 series incremental fiber optic encoder system. Micronor’s newly expanded range of fiber optic rotary sensors ensures the right solution is available for those applications where conventional encoder or resolver performance falls short.
About Micronor
Since 1968, Micronor has been a leading global supplier of automation and motion control products for industrial applications as well as military, aerospace, medical and other harsh/hazardous environments. Products include fiber optic sensors, encoders, resolvers, cam timers, programmable limit switches, motorized potentiometers, pulse generators, handheld pendants and custom engineered feedback and control units. Micronor maintains regional sales, service, engineering and manufacturing facilities in both California USA and Switzerland.
-----
Posted by Lee Mather
Follow OptoIQ on your iPhone; download the free app here.
Subscribe now to Laser Focus World magazine; it's free!