Tunable metamaterial opens the door for terahertz in multiple applications

April 16, 2008
April 16, 2008, Boston, MA--A frequency-agile metamaterial that for the first time can be tuned over a range of frequencies in the so-called "terahertz gap" has been engineered by a team of researchers from Boston College, Los Alamos National Laboratory, and Boston University.

April 16, 2008, Boston, MA--A frequency-agile metamaterial that for the first time can be tuned over a range of frequencies in the so-called "terahertz gap" has been engineered by a team of researchers from Boston College, Los Alamos National Laboratory, and Boston University.

The team incorporated semiconducting materials in critical regions of tiny elements--in this case metallic split-ring resonators--that interact with light in order to tune metamaterials beyond their fixed point on the electromagnetic spectrum, an advance that opens these novel devices to a broader array of uses, according to findings published in the online version of the journal Nature Photonics.

"Metamaterials no longer need to be constructed only out of metallic components," said Boston College Physicist Willie Padilla, the project leader. "What we've shown is that one can take the exotic properties of metamaterials and combine them with the unique prosperities of natural materials to form a hybrid that yields superior performance."

Padilla and BC graduate student David Shrekenhamer, along with Hou-Tong Chen, John F. O'Hara, Abul K Azad and Antoinette J. Tayler of Los Alamos National Laboratory, and Boston University's Richard D. Averitt formed a single layer of metamaterial and semiconductor that allowed the team to tune terahertz resonance across a range of frequencies in the far-infrared spectrum.

The team's first-generation device achieved 20% tuning of the terahertz resonance to lower frequencies--those in the far-infrared region--addressing the critical issue of narrow band response typical of all metamaterial designs to date.

Within the past decade, researchers have sought ways to significantly expand the range of material responses to waves of electromagnetic radiation--classified by increasing frequency as radio waves, microwaves, terahertz radiation, infrared radiation, visible light, ultraviolet radiation, X-rays and gamma rays. Numerous novel effects have been demonstrated that defy accepted principles.

"Metamaterials demonstrated negative refractive index and up until that point the commonly held belief was that only a positive index was possible," said Padilla. "Metamaterials gave us access to new regimes of electromagnetic response that you could not get from normal materials."

Prior research has shown that because they rely on light-driven resonance, metamaterials experience frequency dispersion and narrow bandwidth operation where the centre frequency is fixed based on the geometry and dimensions of the elements comprising the metamaterial composite. The team believes that the creation of a material that addresses the narrow bandwidth limitations can advance the use of metamaterials.

Enormous efforts have focused on the search for materials that could respond to terahertz radiation, a scientific quest to find the building blocks for devices that could take advantage of the frequency for imaging and other applications.

Potential applications could lie in medical imaging or security screening, said Padilla. Materials undetectable through x-ray scans--such as chemicals, biological agents, and certain explosives--can provide a unique "fingerprint" when struck by radiation in the far-infrared spectrum. Metamaterials like the one developed by the research team will facilitate future devices operating at the terahertz frequency of the electromagnetic spectrum.

In addition to imaging and screening, researchers and high-tech companies are probing the use of terahertz in switches, modulators, lenses, detectors, high bit-rate communications, secure communications, the detection of chemical and biological agents and characterization of explosives, according to Los Alamos National Laboratory.

To access the Nature Photonics article:
www.nature.com/nphoton/journal/vaop/ncurrent/full/nphoton.2008.52.html

Sponsored Recommendations

Linear Stages & Rotary Stages for High Precision Automation & Motion Control

Feb. 13, 2025
Motorized Linear Translation Stages & Rotary Precision Positioning Stages for High Performance Automation & Motion Control | PI USA

Motion Controllers for Precision Positioning and Automation

Feb. 13, 2025
PI manufactures a range of precision motion controllers and drivers for positioning systems, including stepper motors, brushless motors, and servo motors.

7 Reasons Why Air Bearings Outperform Mechanical Bearings

Feb. 13, 2025
Frictionless air bearings and air bearing stages have decisive advantages in precision motion and automation applications.

Precision Linear Actuators, Motorized and Piezo-Driven

Feb. 13, 2025
High Performance Linear Actuators & Stages, Ball-Screw Stepper Actuators and Micro Actuators with High-Speed, High Accuracy and Resolution | Manufactured by PI

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!