Opto-Alignment assembly station provides 15 in. of linear travel
The LAS-BT is a 96-lb bench-top assembly station for cementing doublets or aligning lenses during assembly into a lens barrel.
The LAS-BT is a 96-lb bench-top assembly station for cementing doublets or aligning lenses during assembly into a lens barrel. It comes with a 4 in. air-bearing and 15 in. of linear travel. The visible diode laser measures tilt smaller than 5 arcs and provides linear centration accuracy of <5 µm.
Opto-Alignment Technology will release a new product at Photonics West 2012, in the form of a bench-top lens tilt and centration testing instrument. The “LAS-BT” is intended for cementing small doublets and aligning lenses during assembly into a lens barrel. It comes with a 4 inch air-bearing and only 15 in of linear travel. It is not intended to replace the standalone “LAS-UP” for ultra precision alignment of lenses up to 12+ inches diameter. It is 100% designed and made in the USA by OAT.
This is the link on our new website: http://optoalignment.com/news/new-product
Follow us on Twitter
Follow OptoIQ on your iPhone; download the free app here.
Subscribe now to Laser Focus World magazine; it's free!