Combining optics surface-treatment techniques can boost the laser-induced damage threshold of fused silica

Jan. 18, 2018
Surface treatments that include magnetorheological finishing, etching with hydrofluoric acid, ion-beam sputtering, and others can improve the post-polished surface quality of fused silica, thus raising its surface LIDT.

Fused silica is an excellent material for laser optics: not only is it highly transmissive from the near-infrared to the ultraviolet, but it has a very high bulk dielectric breakdown threshold, meaning that pulse energies have to be very high to damage high-quality fused silica internally. But the laser-induced damage threshold (LIDT) for the surface of fused silica is quite a bit lower than for its interior. One reason for this is the surface damage inflicted by optical grinding and polishing of the fused silica. Surface treatments that include magnetorheological finishing (MRF), etching with hydrofluoric (HF) acid, ion-beam sputtering, and others can improve the post-polished surface quality of fused silica, thus raising its surface LIDT.

Scientists at the National University of Defense Technology (Changsha, China) and the China Aerodynamics Research and Development Center (Mianyang, China) have homed in on some of these surface-damage-reducing processes, doing some experiments to characterize them. Using a frequency-tripled Nd:YAG laser with a 7 ns pulse duration at a 1 Hz repetition rate, the group experimentally found that the LIDT of a fused-silica (Heraeus 312) surface already treated with HF acid to raise its damage threshold can be raised a further 30% by a round of ion-beam sputtering (IBS), but only if the IBS is done to a depth <1 μm. If done any further, the IBS causes additional chemical defects that start lowering the LIDT. Also, if an IBS-treated fused-silica surface is then immersed in deionized water, the LIDT drops by about 20%. The results may help to optimize the treatment of polished fused-silica surfaces to maximize their LIDT. Reference: M. Xu et al., Opt. Express (2017); https://doi.org/10.1364/oe.25.029260.

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

Demonstrating Flexible, Powerful 5-axis Laser Micromachining

Sept. 18, 2024
Five-axis scan heads offer fast and flexible solutions for generating precise holes, contoured slots and other geometries with fully defined cross sections. With a suitable system...

Optical Filter Orientation Guide

Sept. 5, 2024
Ensure optimal performance of your optical filters with our Orientation Guide. Learn the correct placement and handling techniques to maximize light transmission and filter efficiency...

Advanced Spectral Accuracy: Excitation Filters

Sept. 5, 2024
Enhance your fluorescence experiments with our Excitation Filters. These filters offer superior transmission and spectral accuracy, making them ideal for exciting specific fluorophores...

Raman Filter Sets for Accurate Spectral Data

Sept. 5, 2024
Enhance your Raman spectroscopy with our specialized Raman Filter Sets. Designed for high precision, these filters enable clear separation of Raman signals from laser excitation...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!