Neodymium:glass laser delivers continuous average power of 600-1200 W in bursts

July 1, 1997
C. Brent Dane and associates at Lawrence Livermore National Laboratory (Livermore, CA) developed a 120-J/pulse Nd:glass amplifier system based on a single Nd:YLF oscillator beam amplified in four discrete Nd:glass, flashlamp-pumped, zigzag amplifiers. The resulting four 30-J beams are phase-locked by stimulated-Brillouin-scattering phase conjugation to produce nearly diffraction-limited pulses from a single aperture at a repetition frequency of u¥to 10 Hz. The system was developed as a long-

Neodymium:glass laser delivers continuous average power of 600-1200 W in bursts

C. Brent Dane and associates at Lawrence Livermore National Laboratory (Livermore, CA) developed a 120-J/pulse Nd:glass amplifier system based on a single Nd:YLF oscillator beam amplified in four discrete Nd:glass, flashlamp-pumped, zigzag amplifiers. The resulting four 30-J beams are phase-locked by stimulated-Brillouin-scattering phase conjugation to produce nearly diffraction-limited pulses from a single aperture at a repetition frequency of u¥to 10 Hz. The system was developed as a long-coherence-length, long-range illuminator for high-resolution coherent imaging.

The laser operates steady-state at a repetition rate of 3 H¥over many hours, or at 10 H¥in 5-s bursts with a burst spacing of 10 s. In paper #CPD27 at CLEO `97, Dane noted that these parameters are conservative and that the system has operated at repetition rates u¥to 5 H¥producing a steady-state average power of 600 W at 1054 nm. A second-harmonic frequency converter is expected to produce 527-nm output with more than 80 J/pulse at repetition rates u¥to 10 Hz.

Sponsored Recommendations

Optical Power Meters for Diverse Applications

April 30, 2024
Bench-top single channel to multichannel power meters, Santec has the power measurement platforms to meet your requirements.

Request a quote: Micro 3D Printed Part or microArch micro-precision 3D printers

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a Micro 3D Printed Benchmark Part: Send us your file.

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!