SLM for laser-based materials processing handles pulsed laser powers up to 400 GW/cm2

Aug. 11, 2020
A spatial light modulator for laser processing of carbon-fiber-reinforced plastics and low-dielectric-constant materials has improved dielectric films that boost its power-handling capability.

Because their precision is higher than conventional mechanical machining, pulsed laser machining systems are becoming widely used for processing resistant materials such as lightweight and high-strength carbon-fiber-reinforced plastics (CFRPs) and low-dielectric-constant (low-k) materials that prevent a drop in operating speed in semiconductor integrated circuits. However, several issues remain, such as the machining speed and processing throughput. Incorporating a spatial light modulator (SLM) into an industrial pulsed laser system allows irradiating diffracted multiple laser beams onto different points of a target sample simultaneously, improving the processing throughput over that for single-beam laser machining. However, so far, the output power required for this type of laser machining has been inadequate. As a result, industrial pulsed lasers with higher output power are becoming available on the market, creating a demand for SLMs that have greater resistance to high laser power levels.

Now, researchers at Hamamatsu (Hamamatsu City, Japan) have developed a liquid-crystal SLM that they say has the world’s highest pulsed-laser power capability of up to 400 GW/cm2. The reflective liquid-crystal (LC)-based SLM has a layer of LC cells sandwiched between a silicon substrate and a layer of glass; the high light-handling capability, which Hamamatsu says is 10X higher than its previous products, was achieved by improving the thin-film design of the dielectric multilayer mirrors that reflect the incident laser beam, and by redesigning the pixel electrode circuit. The SLM operates at a 1050 nm wavelength and has 1272 × 1024 pixels, an 8-bit input signal level, a 12.5 μm pitch, and a 95% aperture ratio. The Hamamatsu group notes that the SLM is viewed as an essential device for new manufacturing and fabrication techniques that use artificial intelligence (AI), such as “cyber-physical system” (CPS)-type laser-processing setups. For more information, contact [email protected].

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

How Precision Motion Systems are Shaping the Future of Semiconductor Manufacturing

March 28, 2024
This article highlights the pivotal role precision motion systems play in supporting the latest semiconductor manufacturing trends.

Understanding 3D Printing Tolerances: A Guide to Achieving Precision in Additive Manufacturing

March 28, 2024
In the world of additive manufacturing, precision is paramount. One crucial aspect of ensuring precision in 3D printing is understanding tolerances. In this article, we’ll explore...

Automation Technologies to Scale PIC Testing from Lab to Fab

March 28, 2024
This webinar will cover the basics of precision motion systems for PIC testing and discuss the ways motion solutions can be specifically designed to address the production-scale...

Case Study: Medical Tube Laser Processing

March 28, 2024
To enhance their cardiovascular stent’s precision, optimize throughput and elevate part quality, a renowned manufacturer of medical products embarked on a mission to fabricate...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!