Lumentum pump laser module has prolonged use in manufacturing applications

The ST2 200 W fiber-coupled pump laser module supports the "build-your-own" kilowatt laser market.

Laser Focus World Editors
Mar 30th, 2017
Content Dam Lfw Online Articles 2017 03 Lumentum

The ST2 200 W fiber-coupled pump laser module supports the "build-your-own" kilowatt laser market. It delivers 200 W of power within 0.15 numerical aperture of a 135 μm core fiber. It is designed for machine tools with high throughput and has been tested for power stability for prolonged use in manufacturing applications.
Lumentum
Milpitas, CA
www.lumentum.com

More in Lasers & Sources
A microresonator pumped with a CW laser (a) produces a microcomb with stable or chaotic behavior, as well as pure quartic soliton (PQS) pulse trains depending on the pump frequency (b). A high-energy random initial state will evolve with time and settle to a stable pulse with near-Gaussian power profile (c) and uniform power spectrum having a remarkable 3 dB bandwidth (d).
Lasers & Sources
Frequency-comb Sources: One microresonator-based soliton comb replaces multiple WDM lasers
Gail Overton
Aug 13th, 2019
Shown are tuning curves for three quantum dots positioned on the waveguide at the locations shown in the inset, to achieve identical emission (a). High-resolution Fabry-Perot interferometer measurements show all three quantum dots simultaneously from an output coupler with identical emission wavelength (b).
Lasers & Sources
Quantum Sources: Squeezed quantum dots create coherent streams of quantum-ready photons
Gail Overton
Aug 13th, 2019
FIGURE 1. In the scalable setting of a spatial photonic Ising machine, binary spins are encoded in the phase of a laser beam (green) by spatial modulation. Tailoring of the beam’s amplitude fixes spin-spin interaction. To find the ground-state spin configuration, the machine recurrently evolves according to a feedback signal from the camera plane. By design, maximizing the intensity in a target region (blue square) corresponds to a spin state with minimum energy.
Software
Photonics Modeling: Optical Ising machines solve complex engineering, science, and even business problems
Aug 13th, 2019
FIGURE 1. Broad clinical applications of photobiomodulation therapy aim at reducing pain and inflammation while promoting healing and regeneration.
Lasers & Sources
Phototherapy: Photobiomodulation therapy—easy to do, but difficult to get right
Aug 13th, 2019
FIGURE 1. Two laser resonators are depicted here: a linear resonator with output coupling at an end mirror, and a unidirectional ring laser.
Lasers & Sources
Laser Design: Understanding and optimizing laser resonator designs: An overview
Dr. Rüdiger Paschotta
Aug 13th, 2019
In-line coherent imaging (ICI) technology for laser welding will increase manufacturing efficiency, streamline validation, and minimize waste.
Lasers & Sources
IPG Photonics and Brose partner on laser weld measurement technology
Gail Overton
Aug 12th, 2019
Northrop Grumman has been selected to develop and integrate a directed-energy prototype solution on a Stryker combat vehicle for the U.S. Army to better protect highly mobile frontline units. The effort will culminate in a competitive performance checkout leading into a range demonstration that informs Maneuver Short Range Air Defense (M-SHORAD) requirements.
Lasers & Sources
U.S. Army contracts Northrop Grumman to develop laser weapon for combat vehicles
Gail Overton
Aug 6th, 2019
Photonics and quantum technology company M Squared Lasers will create 24 new jobs, including 18 new highly-skilled scientific roles, with a $3.5 million dollar (2.9 million pound) research and development (R&D) grant from Scottish Enterprise.
Lasers & Sources
M Squared $3.5M R&D grant to accelerate quantum technology
Gail Overton
Aug 1st, 2019
The LaserTune (left), a packaged QCL by Block Engineering, is the light source in the company's LaserWarn 'trip-wire' open-path gas-sensing system (right).
Test & Measurement
Block MEMS wins $3.5M DARPA contract to protect urban environments against chemical threats
John Wallace
Jul 30th, 2019
Jenoptik's CFO Hans-Dieter Schumacher (left), and its president and CEO Dr. Stefan Traeger (right).
Optics
Stefan Traeger to be chairman of Jenoptik Group for five more years
John Wallace
Jul 30th, 2019