TLM Laser partners with 4Jet to advance laser cleaning technology

May 10, 2019
Laser cleaning is increasingly becoming the preferred method for rust or paint removal and descaling operations.

IMAGE: Shown is a rusty component "cleaned" with laser technology. (Image credit: TLM Laser)

TLM Laser (Worcestershire, England) continues to expand its portfolio of laser-based technologies and systems, by announcing a new partnership agreement with laser surface processing specialist 4Jet (Alsdorf, Germany). The addition of laser cleaning technology to the company's product offering complements its current range of laser processes including: welding, cutting, marking, engraving, hardening, and 3D additive manufacturing.

Lasers continue to find their way into a growing number of industrial applications, offering a highly efficient and more cost-effective alternative to traditional technologies and processes, and this is certainly the case for laser cleaning. The traditional methods used to remove rust, debris or other surface contamination from components typically involve either physical contact with the part through: brushing, scraping, polishing and shot blasting or alternatively by using dry ice or chemical substances. These approaches have their own drawbacks as they are either abrasive, which can potentially damage the base material, or in the case of chemicals somewhat aggressive and through their use adding to environmental pollution.

As a result of the issues surrounding the more traditional approaches to component cleaning, laser cleaning is increasingly becoming the preferred method for rust or paint removal and descaling operations.

The new handheld JETLASER platform from 4JET is the latest addition to their range of laser surface processing systems. Potential applications are wide and varied and include cleaning of molds, tools, fixtures, paint and coating removal operations and pre-treatment of surfaces prior to welding, gluing or coating applications. The JETLASER is currently available in two power levels, 200 W & 500 W average laser power, and is optimized for manual use in the JETLASER M configuration or available for integration to a robot in the JETLASER R variant.

The handheld unit has been designed to offer improved ergonomics and safety. Rather than conventional single hand devices that operate in a similar manner to a gun, the symmetrical 4JET system is based on a two-hand operation that provides for more comfortable use during processing. The 3D printed enclosures on the handheld device mean that it is extremely light to handle and use. The unit is powered by fiber-coupled, maintenance-free solid-state lasers that are integrated into a rugged mobile supply unit.

SOURCE: TLM Laser via Genesis Sales & Marketing; https://www.tlm-laser.com/

About the Author

Gail Overton | Senior Editor (2004-2020)

Gail has more than 30 years of engineering, marketing, product management, and editorial experience in the photonics and optical communications industry. Before joining the staff at Laser Focus World in 2004, she held many product management and product marketing roles in the fiber-optics industry, most notably at Hughes (El Segundo, CA), GTE Labs (Waltham, MA), Corning (Corning, NY), Photon Kinetics (Beaverton, OR), and Newport Corporation (Irvine, CA). During her marketing career, Gail published articles in WDM Solutions and Sensors magazine and traveled internationally to conduct product and sales training. Gail received her BS degree in physics, with an emphasis in optics, from San Diego State University in San Diego, CA in May 1986.

Sponsored Recommendations

Achieving Ultralow-Loss Photonics Array Alignment

Feb. 23, 2024
Two- and three-dimensional photonics arrays are commonly used for coupling light in photonic integrated circuits. With the increasing demand for ultralow-loss transmission in ...

Control Techniques in Laser Processing

Feb. 23, 2024
A laser processing tool is only as good as the motion equipment underneath it. One must first consider design characteristics of a motion platform, and second, advanced control...

High-Precision Laser Processing for Medical Device Manufacturing

Feb. 23, 2024
Laser processing has been used for decades to manufacture tubular medical devices, such as stents, valves, and vascular grafts. However, achieving the precision that is necessary...

Selecting Optimal Positioning Equipment for Laser Direct-Write Processes

Feb. 23, 2024
Choosing the optimal automation equipment for a given process requires a thorough understanding of the process parameters and the effects of positioning errors on the results....

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!