Theralase launches therapeutic laser center in Toronto

May 28, 2013
Toronto, ON, Canada--Theralase Technologies launched its new head office and multidisciplinary therapeutic laser center in the heart of the Beach District of Toronto, ON, Canada to treat pain and inflammation.

Toronto, ON, Canada--Therapeutic laser company Theralase Technologies (TSX-V: TLT) launched its new head office and multidisciplinary therapeutic laser center in the heart of the Beach District of Toronto, ON, Canada. The new laser center will provide local patients with a proven, highly effective, non-invasive light treatment to address painful and inflamed medical conditions, without the need for surgery or pharmaceutical drugs and their associated side effects.

"The Centre will be a multidisciplinary pain and rehabilitation treatment centre focused on delivering Theralase therapeutic laser therapy ( treatments through mainstream medical practitioners, such as: medical doctors, chiropractors, physical therapists, naturopathic doctors, doctors of podiatry and registered massage therapists," said Dr. Rhonda Mostyn, clinic director of Theralase Therapeutic Laser Centre. "Our initial focus will be primarily chronic and acute pain caused by neural muscular skeletal conditions, sports injuries, motor vehicle accidents or trauma, but as the centre grows, we may branch out into other disciplines such as wound healing and addiction."

"With regards to our growing number of customers, the new training facility will provide state of the art conferencing technology and training sessions on our cutting-edge technology, laser therapy certification courses and the latest treatment protocol optimization support," said Roger Dumoulin White, president and CEO of Theralase Technologies.

"The new corporate head office, in addition to housing executive management, finance, sales and marketing functions will also support an ISO-13485 certified, Health Canada, FDA and CE approved facility to manufacture the Theralase line of therapeutic lasers, as well as aftermarket sales and service support for all of Theralase's healthcare customers. Thousands of satisfied healthcare practitioners and patients throughout North America attest to the safety and effectiveness of Theralase's laser technology. We expect the laser centre to be very successful in the near term adding a significant revenue stream to the Company."

The corporate head office and therapeutic laser centre will now be located at 1945 Queen Street East, Toronto, ON, Canada, M4L 1H7; phone: 416-699-LASE (5273), toll-free: 1-866-843-LASE (5273), fax: 416-699-5250, and will be open from 7 am to 7 pm 7 days a week to fully service our local patients and our international sales team.

Founded in 1995, Theralase designs, develops, manufactures, and markets patented, superpulsed laser technology utilized in biostimulation and biodestruction applications to treat pain, inflammation, and for tissue regeneration of neuromusculoskeletal conditions and wound healing. Theralase is currently developing proprietary photodynamic compounds (PDCs) that are able to target and destroy cancers, bacteria, and viruses when light-activated by Theralase’s proprietary and patented laser technology.

SOURCE: Theralase;

About the Author

Gail Overton | Senior Editor (2004-2020)

Gail has more than 30 years of engineering, marketing, product management, and editorial experience in the photonics and optical communications industry. Before joining the staff at Laser Focus World in 2004, she held many product management and product marketing roles in the fiber-optics industry, most notably at Hughes (El Segundo, CA), GTE Labs (Waltham, MA), Corning (Corning, NY), Photon Kinetics (Beaverton, OR), and Newport Corporation (Irvine, CA). During her marketing career, Gail published articles in WDM Solutions and Sensors magazine and traveled internationally to conduct product and sales training. Gail received her BS degree in physics, with an emphasis in optics, from San Diego State University in San Diego, CA in May 1986.

Sponsored Recommendations

Request a quote: Micro 3D Printed Part or microArch micro-precision 3D printers

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

How to Tune Servo Systems: The Basics

April 10, 2024
Learn how to tune a servo system using frequency-based tools to meet system specifications by watching our webinar!

Precision Motion Control for Sample Manipulation in Ultra-High Resolution Tomography

April 10, 2024
Learn the critical items that designers and engineers must consider when attempting to achieve reliable ultra-high resolution tomography results here!

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!