Diode-laser power supplies

Two transient-protected power supplies are designed for use with the company`s high-power diode lasers. The OPC-PS4004 works at 40 A, 4 V. The OPC-PS4010 works at 40 A, 10 V. Both feature soft turn-on/turn-off and have drive-current limiters and fault-detection circuitry for diode protection. The supplies can be externally modulated to 1 kHz. The output current noise and ripple rate, at half full scale, is 0.1% rms or less.

Oct 1st, 1995

Diode-laser power supplies

Two transient-protected power supplies are designed for use with the company`s high-power diode lasers. The OPC-PS4004 works at 40 A, 4 V. The OPC-PS4010 works at 40 A, 10 V. Both feature soft turn-on/turn-off and have drive-current limiters and fault-detection circuitry for diode protection. The supplies can be externally modulated to 1 kHz. The output current noise and ripple rate, at half full scale, is 0.1% rms or less.

Opto Power Corp., City of Industry, CA

More in Lasers & Sources
Allen Nogee (shown here in caricature) is president and principal laser analyst at Laser Markets Research in Scottsdale, AZ.
Commentary
Laser headlights make it to the U.S.
Allen Nogee
Jul 10th, 2019
Quantum states of a photon have been teleported (transferred by entanglement) into a diamond, improving the viability of quantum repeaters and distributed quantum computers.
Lasers & Sources
Yokohama researchers teleport quantum information into a diamond
Gail Overton
Jul 9th, 2019
Corning is using ultrafast lasers for glass cutting to enable processes not possible with scribe and break machining equipment.
Lasers & Sources
Corning using ultrafast laser nanoPerforation process for 3D glass cutting
Gail Overton
Jul 4th, 2019
Laser Photonics' 2000 W handheld laser cleaner removes rust from a surface.
Lasers & Sources
Handheld 2000 W laser cleaner removes corrosion, paint, other contamination
John Wallace
Jul 3rd, 2019
The main component of the cathodoluminescent lamp from Russian researchers includes the cathode modulator unit (1), cathode (2), modulator (3), emitted electrons (4), phosphor (5), aluminum mirror serving as anode (6), anode output (7), and glass vacuum tube (8).
Lasers & Sources
Cathodoluminescent lamps rival LEDs without using rare earths
Gail Overton
Jun 30th, 2019
A diagram shows NIST’s ion trap used for reversible “quantum squeezing” to amplify and measure ion motion. The ion (white ball) is confined 30 microns above the trap surface by voltages applied to the eight gold electrodes and the two red electrodes. Squeezing--that reduces the uncertainty of motion measurements--is achieved by applying a specific signal to the red electrodes. The ion is moved by applying another type of signal to one of the gold electrodes. Then the squeezing is reversed, and the blue electrodes generate magnetic fields used to decode the amplified motion measurements.
Lasers & Sources
NIST quantum squeezing and amplification technique advances quantum computing
Gail Overton
Jun 25th, 2019
Danke 720
Commentary
An era ends
Andreas Thoss
Jun 24th, 2019
Sld Blue Module (1)
Lasers & Sources
Blue laser module technology from SLD Laser debuts
Laser Focus World Editors
Jun 24th, 2019
Laser-based frequency combs are being used to both generate and receive radio frequency (RF) signals.
Lasers & Sources
Frequency combs trick a laser into producing/receiving an RF signal
Gail Overton
Jun 21st, 2019
Illustrative drawing of optical tweezer.
Lasers & Sources
New type of optical tweezers reduces laser intensity at focus by up to 100 times
John Wallace
Jun 20th, 2019