Laser phosphor display boasts low-cost, low-power design

April 1, 2010
A new technology that basically uses a fan-shaped array of modulated laser beams to rapidly activate red, green, and blue phosphor elements in a rigid glass or polymer structure may be the lowest-cost and lowest-power-consumption laser display yet.

A new technology that basically uses a fan-shaped array of modulated laser beams to rapidly activate red, green, and blue phosphor elements in a rigid glass or polymer structure may be the lowest-cost and lowest-power-consumption laser display yet. The surface-emissive laser phosphor display (LPD) from Prysm (San Jose, CA) is scheduled for release in a 25 in. diagonal format in June. It has a viewing angle of nearly 180° and power consumption equivalent to a standard incandescent light bulb (less than 100 W/m2 or 75% less than liquid-crystal displays).

The rapidly and precisely modulated laser beams in the diode array bounce off a rotating mirror, illuminating the necessary phosphor colors to produce a high-quality video image. The 25 in. display consists of 320 horizontal lines. Because the phosphor pixels have no electrical connections, Prysm says they do not experience mechanical or electrical failure and operate through the entire display lifetime. And, unlike conventional liquid-crystal or projection displays, the lasers are turned off for dark pixels of an image (rather than requiring filtering or modulating of an always-on backlight), increasing LPD system efficiency and lifetime. Contact Christine Morris at[email protected].

More Laser Focus World Current Issue Articles
More Laser Focus World Archives Issue Articles

Sponsored Recommendations

Brain Computer Interface (BCI) electrode manufacturing

Jan. 31, 2025
Learn how an industry-leading Brain Computer Interface Electrode (BCI) manufacturer used precision laser micromachining to produce high-density neural microelectrode arrays.

Electro-Optic Sensor and System Performance Verification with Motion Systems

Jan. 31, 2025
To learn how to use motion control equipment for electro-optic sensor testing, click here to read our whitepaper!

How nanopositioning helped achieve fusion ignition

Jan. 31, 2025
In December 2022, the Lawrence Livermore National Laboratory's National Ignition Facility (NIF) achieved fusion ignition. Learn how Aerotech nanopositioning contributed to this...

Nanometer Scale Industrial Automation for Optical Device Manufacturing

Jan. 31, 2025
In optical device manufacturing, choosing automation technologies at the R&D level that are also suitable for production environments is critical to bringing new devices to market...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!