Thermoelectric coolers

July 1, 1997
The RMT-MS thermoelectric cooler is designed for use with high-power optical emitters and diode lasers. The TECs are based on single-crystal bismuth telluride and allow heat pumping of u¥to 40 W/cm2. Sizes range from 3.1 ¥ 1.0 to 4.5 ¥ 5.0 mm with heights from 1.6 to 2.3 mm. Maximum temperature difference between the hot and cool sides is 68C. Currents to achieve maximum cooling range from 0.2 to 1.5 A.

Thermoelectric coolers

The RMT-MS thermoelectric cooler is designed for use with high-power optical emitters and diode lasers. The TECs are based on single-crystal bismuth telluride and allow heat pumping of u¥to 40 W/cm2. Sizes range from 3.1 ¥ 1.0 to 4.5 ¥ 5.0 mm with heights from 1.6 to 2.3 mm. Maximum temperature difference between the hot and cool sides is 68C. Currents to achieve maximum cooling range from 0.2 to 1.5 A.

LasIRvis Technology (Europe) Ltd., Sandy, Beds, England

Sponsored Recommendations

Optical Power Meters for Diverse Applications

April 30, 2024
Bench-top single channel to multichannel power meters, Santec has the power measurement platforms to meet your requirements.

Request a quote: Micro 3D Printed Part or microArch micro-precision 3D printers

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a Micro 3D Printed Benchmark Part: Send us your file.

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!