MD&M East 2018 leads the way into summer

June 19, 2018
I always come across at least one or more new laser companies at this show, and this year was no exception. 
Ron Head Shot Lia 2018 Best

Last week, the MD&M conference was held at the Jacob Javitz center in NYC. It seems like the number of people at this conference goes down every year and the cost (including staying in the city) goes up. Once again, though, it is a good place to spend a day or two meeting up with customers and vendors, but I have to wonder about the cost of actually exhibiting. On one hand, there has to be a critical mass of vendors or there is no show. I am sure many of the companies really do well at this show, but laser manufacturers and service providers may not.

I wrote the above words as the opening paragraph of my MD&M East review one year ago and they still seem to apply in 2018. There are a few vendors that have been at this show for years, including DPSS Lasers and Epilog Laser. They seem to do quite well, as evidenced by the fact that they are exhibiting year after year. IPG Photonics was back this year for the second time, which is a bit unusual since they were about the only laser manufacturer—but because they also provide complete systems, it makes more sense. They were showing equipment from their Marlborough, MA division and not from the Minneapolis division, which is more fully integrated into the medical device world, but their booth seemed to be busy during the times I was there or nearby.

I always come across at least one or more new (for me!) laser companies at this show, and this year was no exception. AP Lazer is headquartered in Lansing, MI, and uses primarily fiber and CO2 lasers in an open architecture configuration with a removable z table and laser top, which makes it possible to cut and engrave much larger parts than with a typical boxed system. This was their first year at the show and the jury is out as to the payback, but according to senior account executive Mandi Rosen, any venue that provides as much traffic as MD&M is a good venue to be in. As of Wednesday afternoon, they were happy with the traffic their booth generated and planned to return.

There is a lot of activity in the laser industry! Mergers and acquisitions, new products, new applications, and a society to promote the safe use of lasers all helping to drive the industry. There are some major changes occurring at the Laser Institute of America (LIA) with new personnel and some new directions for upcoming events. The LIA's 50th Anniversary celebration is this fall in Orlando during ICALEO (the week of October 14th) and a lot of cool things are being planned, so this is a conference you want to start planning for now! I don’t want to let the cat out of the bag, but there may be a very high-profile guest speaker in attendance this year—stay tuned! Also, LIA is cooperating with the sponsoring organizations of IMTS for a day of laser technology on September 12th at the show in Chicago. More information will be forthcoming about this event, but if you are interested in lasers and plan to be at IMTS (or if you just like to visit Chicago!), consider attending this event.

Summer is here in a few days and I for one will be taking full advantage of it. I wish you all a very happy summertime and all the best for your ongoing businesses. Stay tuned for more laser industry news as we prepare for the fall conference schedule.

I am always interested in hearing your thoughts concerning laser micromachining, the laser industry, comments on entrepreneurial endeavors, etc. AND … we are always looking for fresh, publishable material. Please feel free to contact me at [email protected].

About the Author

Ron Schaeffer

Ron Schaeffer, Ph.D., is a blogger and contributing editor, and a member of the Laser Focus World Editorial Advisory Board. He is an industry expert in the field of laser micromachining and was formerly Chief Executive Officer of PhotoMachining, Inc. He has been involved in laser manufacturing and materials processing for over 25 years, working in and starting small companies. He is an advisor and past member of the Board of Directors of the Laser Institute of America. He has a Ph.D. in Physical Chemistry from Lehigh University and did graduate work at the University of Paris. His book, Fundamentals of Laser Micromachining, is available from CRC Press.

Sponsored Recommendations

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

How to Tune Servo Systems: The Basics

April 10, 2024
Learn how to tune a servo system using frequency-based tools to meet system specifications by watching our webinar!

Motion Scan and Data Collection Methods for Electro-Optic System Testing

April 10, 2024
Learn how different scanning patterns and approaches can be used in measuring an electro-optic sensor performance, by reading our whitepaper here!

How Precision Motion Systems are Shaping the Future of Semiconductor Manufacturing

March 28, 2024
This article highlights the pivotal role precision motion systems play in supporting the latest semiconductor manufacturing trends.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!