Photodiode for high-power laser monitoring
Newbury Park, CA - Opto Diode, a division of ITW and a member of the ITW Photonics Group, has introduced its SXUV Ø2.5 mm photodiode with a circular active area. It provides stability after extreme ultraviolet (EUV) conditions, and is housed in a TO-39, 3-pin, windowless package that delivers responsivity down to 1nm. The active area is typically Ø2.5 mm and has a minimum shunt resistance (Rsh) of 20MΩ at ±10mV (typical). The photodiode has use in high-power laser monitoring at wavelengths from 1 to 200nm, or other tasks that require a highly stable photodiode after EUV exposure. Device parameters include reverse breakdown voltage of 20V, with 1nF capacitance. Response time is 1ns (typical) to a maximum of 2ns.
For more information, please visit http://optodiode.com/pdf/SXUV5.pdf.
Industrial Laser Solutions Editors
We edited the content of this article, which was contributed by outside sources, to fit our style and substance requirements. (Editor’s Note: Industrial Laser Solutions has folded as a brand and is now part of Laser Focus World, effective in 2022.)