Industry and research join to improve bonding processes in auto industry

Aachen, Germany - In power electronics systems, bonded connections create the central electrical connections between adjoining surfaces. The quality of these bonded connections is one of the main factors that determines the reliability and availability of drive systems in electric vehicles, and hence constitutes a major design challenge for German auto manufacturers aiming to electrify their vehicles.

Now, the partners participating in the RoBE (Robust Bonds in Electric Vehicles) collaborative research project have developed a reliable means of predicting the service life of these bonded connections and an alternative bonding technique based on laser micro welding that is ready for industrial implementation.

The new technique opens up a wider range of options for the use of wire bonding, especially in applications requiring the joining of copper. Here, modern laser sources with a very high beam quality ensure precise, reproducible weld joints in copper and aluminum. Through the additional use of oscillation welding in combination with adapted design of the wire and ribbon joining zones, the strength of the joint can be improved still further. By comparison with conventional wire bonding, this process offers a higher surface quality and requires less cleaning. Moreover, the process is less dependent on the nature of the underlying surface or the vibration characteristics of the workpiece.

A standard bonding machine was adapted to allow the laser bonding process to be combined with traditional bonding technologies. The new machine now allows the use of a laser in the bonding process. The main applications of this system include ribbon bonding on DCB substrates and copper terminals in the packaging of power electronics assemblies.

Advances in the field of wire bonding technologies that extend the range of design opportunities while at the same time reducing costs are a vital factor in Germany’s future as a provider of electromobility solutions. For this reason, since August 1, 2011, the German Federal Ministry of Education and Research (BMBF) has set aside 4.96 million euros in funding to support this collaborative project as part of its ICT 2020 initiative in the category "Key technologies for electromobility" (STROM).

For more details, visit Fraunhofer ILT.

Photo: Laser-guided bonding head; Copyright Fraunhofer ILT, Aachen.