Highland Technology introduces the T130, a USB/RS-232 enabled pulse generator

Aug. 6, 2021
Unlike typical telecom class EOM driver modules specified for balanced data operation, the T130 output can swing up to 7 volts relative to baseline and is capable of driving high Vpi EOMs at low duties down to single-shot.

Highland Technology introduces the T130, a USB/RS-232 enabled pulse generator suitable for driving LiNbO3 Mach-Zehnder and similar electro-optical devices. Unlike typical telecom class EOM driver modules specified for balanced data operation, the T130 output can swing up to 7 volts relative to baseline and is capable of driving high Vpi EOMs at low duties down to single-shot. 

A built-in edge-triggered width generator is adjustable for delay and width, spanning 250 picoseconds to 300 nanoseconds across three ranges. The T130 produces fast, low-jitter edge transitions, ideal for high-contrast optical gating and precision slicer EOM applications. Output voltage swing is adjustable from -0.5 volts to -7 volts into 50 Ohms. A 10:1 resistive pick-off enables monitoring the drive signal with a 50 Ohm oscilloscope. 

The T130 includes a bias tee injection inductor for operation with single-port modulators. An integral adjustable -6 volts to +6 volts low-noise DC bias generator is included. A routing relay and dedicated SMA bias jack enable externally applied bias to be applied to the RF pulse. The BIAS SMA connector functions as a hi-z monitor of bias voltage when set to internal generator mode. 

A Built In Self Test (BIST) routine monitors internal circuitry for nominal levels and features a fault detection LED. 

The T130 is housed in a compact and rugged extruded aluminum enclosure, ideal for benchtop or OEM applications. An aluminum baseplate is included for surface mounting. 

The T130 power requirement is +24 volts DC at 250mA, max. A locking barrel DC power connector provides secure retention and facilitates system integration. 

In the absence of a computer, the T130 can operate under manual control mode using onboard trimpots and switches. 

Learn More

Sponsored Recommendations

Case Study – Large OAP Mirrors

Dec. 4, 2023
Customized Large Optics by Avantier: Meeting Unique Needs with Precision and Quality In the ever-evolving world of optical technology, the demand for customized large optics ...

Next-level virus detection via WIDE-MIP microscopy

Dec. 4, 2023
Rapid and accurate detection of a virus can quite literally make the difference between life and death. With this in mind, researchers created a mid-infrared photothermal microscope...

Flexible, Thixotropic, One Component Dual Cure Epoxy

Dec. 1, 2023
Master Bond UV23FLDC-80TK is a moderate viscosity, cationic type system that offers both UV light and heat curing mechanisms. It cures readily within 20-30 seconds when exposed...

MRF Polishing

Dec. 1, 2023
Welcome to Avantier, your esteemed partner in optical solutions for over five decades. With a legacy of expert knowledge, we invite you to delve into the realm of precision optics...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!