Titan laser cutting machine speeds throughput

The newest edition to Laser Photonics' product line is the Titan Series. This machine is Laser Photonics' first multipurpose fiber-laser cutting machine with a single pallet shuttle table. It is equipped with a high-powered, energy efficient fiber laser and an advanced direct-drive motion-control platform.

The newest edition to Laser Photonics' product line is the Titan Series. This machine is Laser Photonics' first multipurpose fiber-laser cutting machine with a single pallet shuttle table. It is equipped with a high-powered, energy efficient fiber laser and an advanced direct-drive motion-control platform. Due to the direct delivery method of the beam, fiber-laser equipment requires fewer parts and hardware that can weigh down the motion system. Unlike Co2 laser equipment, the lack of these parts allows the linear drive to operate at its full potential, speeding up the completion time of a specific job. This is especially utilized when cutting thinner sheet metals. The small spot size of the fiber-delivered beam allows a very precise cut which eliminates the post processing steps when working with certain metals. For example, no de-burring processes would need to be performed to increase edge quality of the metal. Click here to watch a video of the system.
Laser Photonics
Lake Mary, FL
www.laserphotonics.com>/b>


__________________
PRESS RELEASE

High Power Fiber Laser Cutting Systems can speed up your throughput on metal processing for three main reasons.

1.) Due to the direct delivery method of the beam, fiber laser equipment requires less parts and hardware which will weigh down the motion system. Unlike Co2 Laser equipment, the lack of these parts allows the linear drive to operate at its full potential speeding up the completion time of a specific job. This is especially utilized when cutting thinner sheet metals.

2.) Thanks to the high-density beam of the laser, materials are able to be pierced quicker and cleaner speeding up the cutting process.

3.) The small spot size of the fiber delivered beam allows a very precise cut which eliminates the post processing steps when working with certain metals. For example, no de-burring processes would need to be performed to increase edge quality of the metal.

Laser Photonics invites you to witness Fiber Laser Cutting at its best performed by the new TITAN System at FABTECH 2009. We will be showcasing the speed of the system while demonstrating the many other benefits of this remarkable machine. We will be following the below cutting schedule at the show to meet your specific application needs.

More in Home