Pulsed and CW green fiber lasers from IPG Photonics

May 12, 2009
At output wavelengths of 532 nm, IPG Photonics' (Oxford, MA) pulsed and continuous wave (CW) green fiber laser promise high single-mode beam quality, ease of use and high reliability at lower prices than competitive green lasers. The pulsed lasers provide a high peak power with scalable average output power up to 10W, pulse duration of just 1 ns, and frequency of 50 to 600 kHz.

At output wavelengths of 532 nm, IPG Photonics' (Oxford, MA) (NASDAQ: IPGP) pulsed and continuous wave (CW) green fiber laser promise high single-mode beam quality, ease of use and high reliability at lower prices than competitive green lasers.

The pulsed lasers provide a high peak power with scalable average output power up to 10W, pulse duration of just 1 ns, and frequency of 50 to 600 kHz. They claim to be far more efficient and compact than other available lasers. Featuring M2 of less than 1.2, the laser includes a collimator, and narrow line width at 532 nm. Higher output powers are planned.

The single-frequency, low-noise CW laser features output power greater than 15W, M2 of less than 1.1, and a line width near 2 MHz at 532 nm. In a compact, rugged design, the CW green fiber laser is well suited for applications where the highest coherency and stability of visible laser emission are required.

For more information see IPG's green laser data sheet.

---

original press release from IPG Photonics

IPG Photonics Announces New Lines of Revolutionary Green Fiber Lasers

Fiber Laser Leader to Enter Additional Markets and Applications with New Pulsed and CW Green Lasers

OXFORD, MA, January 23, 2009 (BUSINESS WIRE)--IPG Photonics (NASDAQ: IPGP), the world leader in high-power fiber lasers and amplifiers, announced today that it has developed two new families of fiber lasers in the green spectrum range that will allow the Company to enter new markets and applications. At output wavelengths of 532 nm, the new pulsed 10W green fiber laser and continuous wave (CW) 15W green fiber laser provide the high single-mode beam quality, ease of use and high reliability that IPG's fiber lasers are known to deliver at lower prices than competitive green lasers.

IPG's green pulsed fiber lasers provide a high peak power with scalable average output power up to 10W, pulse duration of 1 ns only and frequency of 50 to 600 kHz. The novel fiber laser is much more efficient and compact than conventional lasers now on the market, and is ideal for applications in the solar/photovoltaic arena, resistor trimming and marking of transparent materials. Featuring M2 of less than 1.2, the new green pulsed laser includes a collimator, and narrow line width at 532 nm. Higher output powers are planned.

The second green fiber laser introduced today is a single frequency and low noise CW green fiber laser that features output power greater than 15W, M2 of less than 1.1, and a line width near 2 MHz at 532 nm. In a compact, rugged design, the CW green fiber laser is well suited for Ti-sapphire pumping, entertainment and various other applications where the highest coherency and stability of visible laser emission are required.

"The two new green fiber families extend the tradition of innovations for which IPG's fiber lasers are well known, including record wall-plug electrical efficiency, high beam quality, high reliability, low maintenance, ruggedness, compactness, low weight, and very essential economic advantages," said Dr. Valentin Gapontsev, CEO of IPG Photonics Corporation. "Our newest lasers are a direct result of combining our advanced fiber laser platform with the latest state-of-the-art technologies of seed sources and nonlinear converters. IPG also is working to develop similar fiber laser sources with other emission wavelengths in the red, orange, blue and UV spectrum ranges."

The green CW laser will be unveiled at the BiOS (Booth # 8226) and Photonics West (Booth # 1419) shows in San Jose, CA the week of January 25, 2009. IPG is ramping up production of the new green lasers and volume production units are expected to be available in the second quarter of 2009. IPG has been working with key customers on specific applications.

About IPG Photonics Corporation
IPG Photonics is the world leader in high-power fiber lasers and amplifiers. Founded in 1990, IPG pioneered the development and commercialization of optical fiber-based lasers for use in a wide range of applications such as materials processing, advanced, telecommunications and medical ones. Fiber lasers have revolutionized the industry by delivering superior performance, reliability and usability at a lower total cost of ownership compared with conventional lasers, allowing end users to increase productivity and decrease operating costs. IPG has its headquarters in Oxford, Massachusetts, and has additional plants and offices throughout the world. For more information, please visit www.ipgphotonics.com.

Safe Harbor Statement
Information and statements provided by the Company and its employees, including statements in this press release, that relate to future plans, events or performance are forward-looking statements. These statements involve risks and uncertainties. Any statements in this press release that are not statements of historical fact are forward-looking statements, including, but not limited to, those relating to the potential market acceptance of the Company's new green fiber lasers, the opening of new markets and applications for the green fiber lasers, the expected start of volume production of the new green fiber lasers, development of fiber lasers in the red, orange, blue and UV spectrum ranges. Factors that could cause actual results to differ materially include risks and uncertainties, including risks associated with the Company's ability to penetrate new applications for fiber lasers and increase market share, the rate of acceptance and penetration of IPG's products, effective management of growth, level of fixed costs from its vertical integration, intellectual property infringement claims and litigation, interruption in supply of key components, contract cancellations, manufacturing risks, competitive factors including declining average selling prices, building and expanding field service and support operations, uncertainties pertaining to customer orders, demand for products and services, development of markets for the Company's products and services and other risks identified in the Company's SEC filings. Readers are encouraged to refer to the risk factors described in the Company's Annual Report on Form 10-K (filed with the SEC on March 13, 2008) and its periodic reports filed with the SEC, as applicable. Actual results, events and performance may differ materially. Readers are cautioned not to rely on the forward-looking statements, which speak only as of the date hereof. The Company undertakes no obligation to update the forward-looking statements that may be made to reflect events or circumstances after the date hereof or to reflect the occurrence of unanticipated events.

CONTACT:
Bill Shiner
Vice President Industrial
IPG Photonics Corporation
(508) 373-1100
[email protected]

Posted by Barbara G. Goode, [email protected], for BioOptics World.

Sponsored Recommendations

Request a quote: Micro 3D Printed Part or microArch micro-precision 3D printers

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

How to Tune Servo Systems: The Basics

April 10, 2024
Learn how to tune a servo system using frequency-based tools to meet system specifications by watching our webinar!

Precision Motion Control for Sample Manipulation in Ultra-High Resolution Tomography

April 10, 2024
Learn the critical items that designers and engineers must consider when attempting to achieve reliable ultra-high resolution tomography results here!

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!