Bookham to Announce New Laser Processes at OFC

March 7, 2003
Ottawa, Canada, March 7, 2003, Bookham Technology will introduce at the Optical Fiber Communication Conference and Exposition (OFC) in March 2003 a novel in-situ etch and regrowth process for uncooled InP buried-heterostructure lasers that results in 50% lower rates of burn-in degradation than can be obtained by current standard processes.

Ottawa, Canada, March 7, 2003, Bookham Technology will introduce at the Optical Fiber Communication Conference and Exposition (OFC) in March 2003 a novel in-situ etch and regrowth process for uncooled InP buried-heterostructure lasers that results in 50% lower rates of burn-in degradation than can be obtained by current standard processes.

The times-2 burn-in improvement is extremely promising for increasing the long-term reliability of the devices, which also exhibit 20% lower threshold currents. The new process is also compatible with the newer Aluminium Gallium Indium Arsenide (AlGaInAs) materials system and promises significant reliability gains for this developing technology.

Power-efficient uncooled directly modulated lasers with extended reach are an important class of communications laser for which buried heterostructures are essential, as these structures mitigate the effects of thermally induced chirp and power rollover that adversely impact laser performance. However, the process needed to fabricate buried heterostructures is crucial to device reliability.

The etching and regrowth required to make buried heterostructures can leave defects or introduce surface contamination on the mesa sidewalls. When the buried heterostructure is subsequently regrown on the material surface, any etch damage or impurities that remain at the surface can introduce a leakage current that increases the laser threshold current during device operation and degrades the laser's long-term reliability.

This effect is particularly severe for AlGaInAs, a new laser materials system of growing industry interest because of its performance characteristics and potential to operate at higher temperatures than standard InP. In principle, this would allow more compact devices to be fabricated as less passive cooling
is needed. Unfortunately, AlGaInAs oxidixes rapidly after etching, making the etched surfaces highly vulnerable to damage and contamination.

Bookham's unique in-situ etching process eliminates the problem of postetching surface damage or contamination by performing the etching step within the MOCVD reactor itself. Overgrowth is performed immediately on the clean freshly etched surface, thereby preventing the surface contaminations and oxidation that can occur in the standard process of using an external etcher to which the material has to be transferred at the risk of damage and contamination.

The paper details how InP 2.5Gbit/s directly modulated lasers have been grown and fabricated by the process, and also how two formulations of AlGaInAs buried heterostructures have been grown. The InP buried-heterostructure lasers consisted of an active layer with six compressively strained 6nm quantum wells in a separate confinement heterostructure, with a 1541nm target wavelength gain-coupled grating etched above the quantum-well stack. The final structures for both InP and AlGaInAs showed smooth planes and excellent surface morphology.

Laser Focus World

Sponsored Recommendations

March 31, 2025
Enhance your remote sensing capabilities with Chroma's precision-engineered optical filters, designed for applications such as environmental monitoring, geospatial mapping, and...
March 31, 2025
Designed for compatibility with a wide range of systems, Chroma's UV filters are engineered to feature high transmission, superior out-of-band blocking, steep edge transitions...
March 31, 2025
Discover strategies to balance component performance and system design, reducing development time and costs while maximizing efficiency.
March 31, 2025
Explore the essential role of optical filters in enhancing Raman spectroscopy measurements including the various filter types and their applications in improving signal-to-noise...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!