HeatSign

Room 903, Building D1, No. 999 GaoLang East Road Binhu District
Wuxi, Jiangsu 214000
China
+86-150-6147-7073
Visit Company Website
[email protected]

More Info on HeatSign

HeatSign builds fiber, MOPA, CO2 and UV laser marking machines, dot peen markers and pulsed laser cleaners in Wuxi, China. Every machine runs a 48–72 hour burn-in.

Products

Supplier Submitted
100 W fiber laser with 3D dynamic focus: keeps the beam in focus on curved surfaces, large fields and parts with height changes.
Supplier Submitted
Handheld fiber laser with a 1.5 kg head and 7-inch touch screen – no PC needed. Optional 22.2 V battery gives 3–4 hours. Marks large or installed parts on site.
Courtesy of HeatSign
uv laser marking machine
Supplier Submitted
355 nm UV laser, 5 W (air-cooled) or 10 W (water-cooled). Cold marking for glass, PCBs, ceramics and medical plastics; small text and codes with minimal heat damage.
Courtesy of HeatSign
mopa laser marker
Supplier Submitted
30/60/100 W MOPA fiber laser with JPT source and 2–350 ns pulse width. Colour marks on stainless steel and titanium, black marks on anodized aluminium, low heat input on...
Supplier Submitted
1064 nm fiber laser marker, 20/30/50 W, field 110×110 to 300×300 mm. Genuine MAX or JPT source, licensed EZCAD software, measured output power report with every unit...

HeatSign Categories

Buyer’s Guide Listing Information

Click here for listing information and directions on how to add or update your company.

Request More Information From HeatSign

By clicking above, I agree to Endeavor Business Media's Terms of Service and consent to receive promotional communications from Endeavor, its affiliates, and partners per its Privacy Notice. I also understand my personal information will be shared with the sponsor of this content, who may contact me about their offerings per their privacy policy. I can unsubscribe anytime.