Casio launches GREEN SLIM mercury-free hybrid light projector

Jan. 19, 2010
Casio America (Dover, NJ) and its parent company Casio Computer (Tokyo, Japan) have created a mercury-free, high-brightness laser and light-emitting diode (LED) hybrid light source under its “clean & green” concept for use in next-generation projectors. While not a miniature picoprojector, the GREEN SLIM projector is small and thin.

Casio America (Dover, NJ) and its parent company Casio Computer (Tokyo, Japan) have created a mercury-free, high-brightness laser and light-emitting diode (LED) hybrid light source under its “clean & green” concept for use in next-generation projectors. While not a miniature picoprojector, the GREEN SLIM projector is small and thin (see also related story, “Lasers and MEMS take video projection beyond HDTV”).

Currently, high-pressure mercury lamps are used as the light source for data projectors capable of producing 2,000 or more lumens. Semiconductor light sources that do not contain environmentally harmful mercury such as lasers and LEDs offer promising light sources for next-generation DLP projectors. Until now, however, they were only usable as light sources for small, low-lumen projectors because high-output sources capable of producing green light have not been possible for mass production.

Casio has changed all this by creating an original mercury-free hybrid light source capable of generating high brightness by combining a laser, a fluorescent element, and an LED. Casio has achieved high output of green light, which has been considered difficult with conventional semiconductor light sources, by very efficiently converting blue laser light into green light, using the fluorescent element. The high-brightness light of 2,000 or more lumens was then attained by projecting blue laser light, green light converted from blue laser light with the element, and light emitted by a red LED through a DLP chip onto the screen.

Use of the laser and LED hybrid light source makes Casio’s GREEN SLIM projectors the world’s first data projectors bright enough (2,000-3,000 lumens) for projection in a well lit room without using a high-pressure mercury lamp. Usability features have also been greatly improved: the body, no bigger than the size of a standard 8 1/2 x 11 piece of paper, is slim (1.7 inches) and lightweight (5 lbs).

The projector produces bright colors through upgraded color purity, the light source has a life of approximately 20,000 hours, projection at maximum brightness is possible in a minimum of eight seconds, and no cool down is needed when turning the projectors off.

“Casio is thrilled to introduce this entirely new lineup of eco-friendly Super Slim projectors,” said Toshiharu Okimuro, Chairman of Casio America. “The advances we have made to provide superior brightness and energy-saving features make it the perfect tool for the road warrior, instructor, gamer and general consumer for home entertainment.”

About the Author

Gail Overton | Senior Editor (2004-2020)

Gail has more than 30 years of engineering, marketing, product management, and editorial experience in the photonics and optical communications industry. Before joining the staff at Laser Focus World in 2004, she held many product management and product marketing roles in the fiber-optics industry, most notably at Hughes (El Segundo, CA), GTE Labs (Waltham, MA), Corning (Corning, NY), Photon Kinetics (Beaverton, OR), and Newport Corporation (Irvine, CA). During her marketing career, Gail published articles in WDM Solutions and Sensors magazine and traveled internationally to conduct product and sales training. Gail received her BS degree in physics, with an emphasis in optics, from San Diego State University in San Diego, CA in May 1986.

Sponsored Recommendations

Advancing Neuroscience Using High-Precision 3D Printing

March 7, 2025
Learn how Cold Spring Harbor Laboratory Used High-Precision 3D Printing to Advance Neuroscience Research using 3D Printed Optical Drives.

From Prototyping to Production: How High-Precision 3D Printing is Reinventing Electronics Manufacturing

March 7, 2025
Learn how micro 3D printing is enabling miniaturization. As products get smaller the challenge to manufacture small parts increases.

Sputtered Thin-film Coatings

Feb. 27, 2025
Optical thin-film coatings can be deposited by a variety of methods. Learn about 2 traditional methods and a deposition process called sputtering.

What are Notch Filters?

Feb. 27, 2025
Notch filters are ideal for applications that require nearly complete rejection of a laser line while passing as much non-laser light as possible.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!