Laser power sensors eliminate need for a stand-alone meter

Dec. 23, 2009
The PowerMax USB/RS sensors from Coherent are the world's first laser power sensors that utilizes state-of-the-art microelectronics miniaturization techniques and integrate an entire instrument within a USB 2.0 or RS-232 cable connector.

The PowerMax USB/RS sensors from Coherent are the world's first laser power sensors that utilizes state-of-the-art microelectronics miniaturization techniques and integrate an entire instrument within a USB 2.0 or RS-232 cable connector. The sensors have all the signal processing and power measurement electronics normally contained in a LabMax meter, and connects directly to a PC with plug-and-play functionality. Ideally suited for low- and high-volume embedded sensor applications, this new family of sensors eliminates the need for a separate meter box, thus delivering a significant savings in cost and space, but with no reduction in performance. The PowerMax USB/RS product lines currently include a range of thermopile sensors, as well as one semiconductor photodiode-based detector. Together, these sensors enable accurate laser power measurement from the deep ultraviolet to the infrared (190 nm to 11 µm), over a power range extending from microwatts to kilowatts.
Coherent
Santa Clara, CA
www.coherent.com


___________________
PRESS RELEASE


New Laser Power Sensors Eliminate Need for a Stand Alone Meter

Santa Clara, Calif., December 15, 2009 – The new PowerMax™ USB/RS sensors from Coherent Inc. (Santa Clara, CA) (Nasdaq: COHR) are the world's first laser power sensors that utilizes state of the art microelectronics miniaturization techniques and integrate an entire instrument within a USB 2.0 or RS-232 cable connector. Specifically, PowerMax USB/RS sensors have all the signal processing and power measurement electronics normally contained in a LabMax meter, and connects directly to a PC with plug and play functionality. Ideally suited for low and high volume embedded sensor applications, this new family of sensors eliminates the need for a separate meter box, thus delivering a significant savings in cost and space, but with no reduction whatsoever in performance.

Coherent's PowerMax PC applications software provides a virtual instrument interface for these sensors that enables the operator to take laser power readings, log data and compute measurement statistics. Users can also write their own software using host interface commands that control all aspects of power meter operation.

The PowerMax USB/RS product lines currently include a range of thermopile sensors, as well as one semiconductor photodiode-based detector. Together, these sensors enable accurate laser power measurement from the deep ultraviolet to the infrared (190 nm to 11 µm), over a power range extending from microwatts to kilowatts.

These new PowerMax products will benefit a wide range of users. These include OEMs who want to embed power measurement electronics within their own instrumentation, field service engineers who already carry a laptop computer, and operators of computer controlled laser burn-in racks and long-term reliability test benches. In addition, PowerMax USB and RS sensors are useful for general laboratory applications in which experimental data acquisition is performed from a central PC.

Founded in 1966, Coherent, Inc. is a Russell 2000 Index company and a world leader in providing laser-based solutions to the commercial and scientific research markets. Please direct any questions to Sean Bergman, product manager, at (503) 454-5785. For more information about Coherent, including product and financial updates, visit our website at http://www.Coherent.com.

Sponsored Recommendations

Optical Power Meters for Diverse Applications

April 30, 2024
Bench-top single channel to multichannel power meters, Santec has the power measurement platforms to meet your requirements.

Request a quote: Micro 3D Printed Part or microArch micro-precision 3D printers

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a Micro 3D Printed Benchmark Part: Send us your file.

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!