3D Imaging: External optical probe images breast cancer in 2D—3D imminent

Dec. 11, 2015
A new imaging technique for clinical breast imaging studies uses a fiber-optic probe to both deliver and channel reflected illumination.

In the United States, breast cancer is the second leading cause of cancer death after lung cancer. While x-ray mammography has a high success rate in the detection of cancerous tumors, it also has a 20% false-negative detection rate; that is, cancer is present but not detected.

A new imaging technique developed by scientists at Florida International University collaborating with the Sylvester Comprehensive Cancer Center and Advanced Medical Specialties (all in Miami, FL) for clinical breast imaging studies uses a fiber-optic probe to both deliver and channel reflected illumination from a 785-nm-emitting laser diode back to a CCD detector to generate two-dimensional (2D) surface maps of total hemoglobin absorption.1 Higher hemoglobin presence has been shown to be indicative of the increased vasculature and higher blood content because of the presence of a cancerous tumor.

Diffuse optical imaging

Clinical studies have proven that breast cancer is characterized by increased hemoglobin (HbT) concentration, which is detected by its increased optical absorption beyond visible wavelengths.

Two different probes were designed for 2D imaging. In the generation-1 device, the 500 mW output from a 785 nm laser diode is split into six fibers, each with less than 5 mW optical power at the tissue end. In addition, 165 fibers channel light back to the CCD for illumination from a 4 × 9 cm2 contoured probe face. The generation-2 device has six laser diodes with 100 mW output resulting in about 5 mW of output on the tissue from two 4 × 5 cm2 probe faces, each with three illumination and 96 collection fibers.

The second-generation probe was designed to increase illumination uniformity as well as allow reflectance and transmittance imaging of the breast, apart from bilateral simultaneous illumination of both breasts. For the probes, 600-μm-diameter multimode fibers with a numerical aperture of 0.22 were used.

The CCD data consisted of 5 to 10 measurements with a 0.2 s exposure time averaged across the measurement set. A custom-developed MATLAB software routine post-processes the data to generate 2D contour plots of optical intensity vs. probe surface location.

A 785 nm wavelength was chosen as it is close to the "isosbestic point," whereby the absorption spectra of oxyhemoglobin (HbO) and deoxyhemoglobin (HbD) intersect and higher absorption regions indicate increased total hemoglobin concentrations that are not dependent on the oxygen saturation content of hemoglobin. Normal breast tissue scans from the contralateral breast of each patient were subtracted from cancerous tissue to subtract background noise from the collected scans.

In a study of five breast cancer patients aged 51 to 74, the fiber probe was able to detect invasive ductal carcinoma, ductal carcinoma in situ, and lymphatic spread of cancer. Future work centers on coupling the 2D measurements with real-time tracking and computational tools (as demonstrated by previous studies in phantoms and normal human subjects), resulting in a 3D tomographic image of HbT concentration. Furthermore, adding more source wavelengths (690 and 830 nm) to the 785 nm probe will allow the collection of both HbO and HbD concentrations as well as total HbT concentration. HbO and HbD can indicate whether a tumor is benign or malignant.

"An accessible, safe imaging device using light is what the future generations need to image the breast tissues with no radiation, increased affordability, and ease of real-time imaging during periodic visits to the doctor's office," says Anu Godavarty of the Optical Imaging Laboratory at Florida International University.


1. S. J. Erickson-Bhatt et al., Biomed. Phys. Eng. Express, 1, 045003, 1–11 (Oct. 23, 2015).

About the Author

Gail Overton | Senior Editor (2004-2020)

Gail has more than 30 years of engineering, marketing, product management, and editorial experience in the photonics and optical communications industry. Before joining the staff at Laser Focus World in 2004, she held many product management and product marketing roles in the fiber-optics industry, most notably at Hughes (El Segundo, CA), GTE Labs (Waltham, MA), Corning (Corning, NY), Photon Kinetics (Beaverton, OR), and Newport Corporation (Irvine, CA). During her marketing career, Gail published articles in WDM Solutions and Sensors magazine and traveled internationally to conduct product and sales training. Gail received her BS degree in physics, with an emphasis in optics, from San Diego State University in San Diego, CA in May 1986.

Sponsored Recommendations

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

How to Tune Servo Systems: The Basics

April 10, 2024
Learn how to tune a servo system using frequency-based tools to meet system specifications by watching our webinar!

How Precision Motion Systems are Shaping the Future of Semiconductor Manufacturing

March 28, 2024
This article highlights the pivotal role precision motion systems play in supporting the latest semiconductor manufacturing trends.

Melles Griot® XPLAN™ CCG Lens Series

March 19, 2024
IDEX Health & Science sets a new standard with our Melles Griot® XPLAN™ CCG Lens Series fluorescence microscope imaging systems. Access superior-quality optics with off-the-shelf...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!